SEATEC STANDARD PRO Self-Polishing Antifouling
SVB recommends the following for these items
Product details
Processing instructions
Older self-polishing antifoulings can be painted over without issue after thorough cleaning. A special primer is not necessary in this case.
For coated surfaces
- In good condition: Remove fouling, impurities and paint residues completely and then sand wet with 80-120 grit sandpaper (not dry!). If existing antifouling is not compatible or unknown, seal with suitable barrier coat.
- In poor condition: Remove all antifouling residues.
GRP/Blank gelcoat: Make sure the surface is clean, dry, dust-free and in a generally good condition. Then prime the surface with Plasmotec or with Epotec (osmosis protection). Then apply two coats of STANDARD PRO.
Steel/lead and wood: Make sure the surface is clean, dry, dust-free and in a generally good condition. Then prime the surface with Plasmotec or with Epotec to protect the hull from corrosion. Then apply two coats of STANDARD PRO.
Not suitable for application on aluminium or older PTFE antifoulings!
Drying time | ||||
Temperature | 5° C / 41° F | 15° C / 59° F | 23° C / 73° F | 35° C / 95° F |
Hand dry after | 60 minutes | 45 minutes | 30 minutes | 20 minutes |
Launch after | 8 hours | 6 hours | 4 hours | 4 hours |
Overcoat interval | |
Temperature | Time |
5° C / 41° F | 16 hours |
15° C / 59° F | 10 hours |
23° C / 73° F | 6 hours |
35° C / 95° F | 4 hours |
Use biocidal products with care. Always read the label and product information prior to use.
Product safety
Please note the following hazard warnings:
May cause respiratory irritation.
Very toxic to aquatic life with long lasting effects.
Flammable liquid and vapour.
Causes serious eye damage.
Immediately call a POISON CENTER or doctor/physician.
IF IN EYES:
Dispose of contents/container to …
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Take off contaminated clothing and wash before reuse.
IF ON SKIN:
In case of inadequate ventilation wear respiratory protection.
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid release to the environment.
Use only outdoors or in a well-ventilated area.
Keep cool.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Read label before use.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
Documents
Accessories
Customers also bought
Similar items
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .