INTERNATIONAL CRUISER 200 Self-Polishing Antifouling
SVB recommends the following for these items
Product details
Polishing antifouling with effective protection against organisms such as algae. CRUISER 200 is a polishing antifouling especially for aluminium boats for use in both salt and fresh water. The polishing property prevents the build-up of thicker layers and provides fouling protection for one season. Suitable for all boat building materials, including primed aluminium. Yield: 10 m²/l. Number of coats: Two per season.
Processing instructions
Technical data
- Processing temperature: +5° C to +35° C
- Drying time at 15 °C: 45 minutes (dust dry)
- Overcoating time at 15 °C: min. 10 hours
Can be applied to most antifoulings provided they are in good condition. Not to be used in combination with VC17m or PTFE-containing antifoulings.
For coated surfaces
- In good condition: Remove fouling, impurities and paint residues completely. High pressure clean the surface and/or remove loose parts and finally wet sand with 80-120 grit sandpaper (do not dry sand!). If existing antifouling is not compatible or unknown, seal with suitable barrier coat.
- In poor condition: Use Interstrip to remove all antifouling residues.
GRP/Blank gelcoat: Make sure the surface is clean, dry, dust-free and in a generally good condition. Use Thinner No. 3 for degreasing. Coat the surface to be treated with Gelschield 200 (osmosis protection) or Primocon. Then apply two coats of CRUISER 200. Renew every season.
Wood: Make sure that the surface is clean, dry as well and dust-free and in generally good condition. Use Thinner No. 3 for degreasing. Prime with Interprotect or Primocon. Then apply two coats of CRUISER 200. Renew every season.
Steel/Aluminium/Lead: Make sure the surface is clean, dry, dust-free and in generally good condition. Use Thinner No. 3 for degreasing. Prime with Interprotect or Primocon. Then apply two coats of CRUISER 200. Renew every season.
These antifoulings / paints may not be delivered by us to Switzerland, the Netherlands and Belgium.
Use biocidal products with care. Always read the label and product information prior to use.
Product safety
Please note the following hazard warnings:
May cause respiratory irritation.
May cause drowsiness or dizziness.
Very toxic to aquatic life with long lasting effects.
Flammable liquid and vapour.
Contact with acids liberates very toxic gas.
Repeated exposure may cause skin dryness or cracking.
Dispose of contents/container to …
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Take off contaminated clothing and wash before reuse.
IF ON SKIN:
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid release to the environment.
Use only outdoors or in a well-ventilated area.
Keep cool.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Read label before use.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
Documents
Item no.: 40735,40736
Accessories
Customers also bought
Similar items
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .