SVB price: €18.45 (€36.89 / kg )
Excl. VAT, excl. shipping costs.
This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
more than 100 in stock
Item no.
Model no.
SEATEC - Epoxy filler

Product details

Versatile, 2-component, solvent-free epoxy putty for repairs and filling in areas below and above the waterline. Suitable for all common boatbuilding materials. The putty can be applied without shrinkage and cracking in a thickness of up to 2.0 cm per application. When cured, it has a high degree of water resistance and good sanding properties. Can also be used to put a stop to osmotic damage. GRP, steel and aluminum substrates should first be primed with the 2-component SEATEC EPOXY PRIMER prior to applying the putty. Color of the mixture: light grey.
  • Processing temperature: at least +10° C
  • Pot life: approx. 30 minutes (+20° C)
  • Sandable after: approx. 6 hours (+20° C)

Product safety

Please note the following hazard warnings:

Hazard pictograms
Signal word
Hazard warnings
Causes skin irritation.
May cause an allergic skin reaction.
Causes serious eye irritation.
Toxic to aquatic life with long lasting effects.
Causes severe skin burns and eye damage.
Contains epoxy constituents. May produce an allergic reaction.
Contains (name of sensitising substance). May produce an allergic reaction.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Do not breathe dust/fume/gas/mist/vapours/spray.
Wash … thoroughly after handling.
Avoid release to the environment.
Wear protective gloves/protective clothing/eye protection/face protection.
Immediately call a POISON CENTER or doctor/physician.
Collect spillage.
IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Store locked up.
Dispose of contents/container to …
H315, H317, H319, H411, H314, EUH205, EUH208, P101, P102, P260, P264, P273, P280, P310, P391, P301+P330+P331, P303+P361+P353, P305+P351+P338, P405, P501


en-flag Safety datasheet
PDF, 565,40 KB
en-flag Safety datasheet
PDF, 567,41 KB
de-flag Safety datasheet
PDF, 564,49 KB
de-flag Safety datasheet
PDF, 567,45 KB
fr-flag Safety datasheet
PDF, 578,69 KB
fr-flag Safety datasheet
PDF, 580,66 KB
it-flag Safety datasheet
PDF, 569,52 KB
it-flag Safety datasheet
PDF, 570,35 KB

What other SVB customers have to say

100% real reviews
Lothar C.
Flag of Germany Verified purchase 24208
sehr gutes Produkt, lässt sich gut und einfach verarbeiten.
Bernhard H.
Flag of Germany Verified purchase 24208
Wie immer eine Top Ware und ein schneller Versand Danke
Mario P.
Flag of Germany Verified purchase 24208
Wie immer super!!!
Was will man bei einem Leerrohr sagen?
Den Spachtel habe ich schon öfter verarbeitet und der ist absolut ok. Der Service von SVB ist nach meiner Meinung super. Hier kann man anrufen und erreicht auch jemand. Wie bereits erwähnt, lohnt sich auch eine Reise nach Bremen in den Shop. Ich komme auf jeden Fall mal wieder vorbei.
View all ratings

Rate product

How would you rate this product?
Completely fails to meet my expectations
Only some expectations are met
Meets my basic expectations
Slightly better than my general expectations
Fully exceeds my expectations
Click on the stars to rate

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: or by phone on: +49 (0)421 57290510 .

  • More "Customers ask customers" available in the following languages :
  • Flag of Français
  • Flag of Deutsch
No questions asked yet. Be the first to ask a question!