SEATEC PLASMOTEC One-Component Underwater Primer
Article Number
24217
EAN
4260416460188
Model no.
24217
Description
SEATEC - PLASMOTEC underwater primer
No. of components
1 component
Area of application
Below water
For substrate
GRP, Wood, Steel, Aluminium
Method of application
Roller, Brush
Osmosis prevention
No
Colour
Grey
Yield (theoretical)
6
m²
Overcoating intervals
See data sheet
SVB recommends the following for these items
Product details
1-component primer for underwater coating based on chlorinated rubber. SEATEC Plastomec is ideal as a barrier primer under antifouling and as bonding agent when changing antifouling. It offers high-quality, water-resistant protection against penetrating moisture on GRP, wood or metallic substrates. Fast drying. Recoatable with almost all antifouling types. Application with brush or roller only. Substrate preparation: The substrate must be clean, dry and free of grease and wax. Old coatings must be intact and have good adhesive properties. Waiting time between coats: 4 hrs. (20 °C) Can be recoated with antifouling: after approx. 5 hrs. (20 °C) Colour: grey Yield: approx. 8 m2/litre.
Product safety
Please note the following hazard warnings:
Hazard pictograms
Signal word
Warning
Hazard warnings
Causes skin irritation.
Causes serious eye irritation.
May cause respiratory irritation.
May cause drowsiness or dizziness.
May cause damage to organs through prolonged or repeated exposure.
Harmful to aquatic life with long lasting effects.
Flammable liquid and vapour.
Dispose of contents/container to …
Store locked up.
In case of fire: Use … for extinction.
Collect spillage.
Avoid release to the environment.
Use only outdoors or in a well-ventilated area.
Do not breathe dust/fume/gas/mist/vapours/spray.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
Contains (name of sensitising substance). May produce an allergic reaction.
Causes serious eye irritation.
May cause respiratory irritation.
May cause drowsiness or dizziness.
May cause damage to organs through prolonged or repeated exposure.
Harmful to aquatic life with long lasting effects.
Flammable liquid and vapour.
Dispose of contents/container to …
Store locked up.
In case of fire: Use … for extinction.
Collect spillage.
Avoid release to the environment.
Use only outdoors or in a well-ventilated area.
Do not breathe dust/fume/gas/mist/vapours/spray.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
Contains (name of sensitising substance). May produce an allergic reaction.
H315, H319, H335, H336, H373, H412, H226, P501, P405, P370+P378, P391, P273, P271, P260, P210, P102, P101, EUH208
Documents
Safety datasheet
PDF, 666,21 KB
Accessories
Customers also bought
-26%
SEATEC
STANDARD PRO Self-Polishing Antifouling
€28.53
from
€20
97
8 variants
-26%
SEATEC
SPRINT PRO Hard Antifouling
€38.61
from
€28
53
8 variants
-27%
SEATEC
Antifouling Thinner
€18.45
only
€13
40
> 100
-23%
SEATEC
EPOTEC Epoxy Primer
€29.37
from
€22
65
2 variants
-22%
SEATEC
Epoxy Putty
€26.85
from
€20
97
2 variants
Similar items
NEW
SEAJET
Multipurpose 2-Component Epoxy Primer Spray
€26.01
only
€24
33
11
NEW
SEAJET
Multipurpose 2-Component Epoxy Primer
€52.06
from
€44
50
4 variants
NEW
SEAJET
015 Underwater Primer Spray
only
€17
61
11
NEW
SEAJET
015 Underwater Primer
€33.57
from
€31
05
2 variants
NEW
INTERNATIONAL
B-FREE CONVERSION COAT 2-Component Primer
€45.00
from
€41
97
2 variants
NEW
INTERNATIONAL
B-FREE TIECOAT 2-Component Primer
from
€50
38
2 variants
Zinc Primer Spray / 400 ml
only
€10
04
8
HEMPEL
2-Component Conversion Primer
from
€41
13
2 variants
SPRENGER
PROP SPRAY 400 ml / grey
only
€16
76
> 100
-44%
BOERO
MISTRAL FONDO Primer
€34.32
from
€19
29
2 variants
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
Technical question
Question:
Jerry L.
asked
on Apr 17, 2019
Good evening, Which thinner should be used with this PLASMOTEC One-Component Underwater Primer? Or should it be used at all?
Thanks.
Answer:
I have not used the Plasmotec primer yet so do not know what thinner, if any should be used. It should give better protection without thinning.
Question:
Brian J.
asked
on Feb 15, 2020
Can this product be used as a primer for jotun seaforce 30 antifouling?
thanks
Answer:
Dear customer, please email info@svb24.com in this case.
Question:
Markku S.
asked
on Nov 5, 2020
How many years is plasmotec available to use? I bought few liters three years ago and they have been closed and sealed in plastic in cool place. Is pltec still ok goood and to paint?
Answer:
Dear customer, there should be a batch number with the dates printed on the container to check. Thanks.
Question:
Karlis B.
asked
on Nov 20, 2020
Hello, Can I use Plasmotec to seperate Seatech hard antifoiling paint from VC 17m extra?
Answer:
Dear customer, please email info@svb24.com in this case.
Question:
Eero K.
asked
on Sep 25, 2022
I have strange difficulties with applying anrifouling on my lead keel. I used Plasmotec on clean and sanded keel and painted it then with Seatec Polishing Antifouling, but there seems to some sort of an incompatibility issue. After four months in water the keel looks like infested with small-pox blisters and scars. Primer and antifouling just peel off in small patches. However, Plasmotec is said to be suitable for underwater areas and can be used on steel, aluminium, wood and GRP. Lead is not mentioned in this list of suitable surfaces?
Has any one any experience or advice on this rather annoying problem? Should I try 2-component primer or is lead unsuitable as surface to begin with?
Answer:
Dear customer, please email info@svb24.com in this case.
Question:
Pedro A.
asked
on Feb 13, 2023
Dear Sirs, I’m planning to buy Seatec hard antifouling for a 10m sailboat. Any special advises for painting? With this hard antifouling can I paint two hands paint (one over the other)? What primer shall I use?
For how long this paint last over Portuguese waters?
Waiting for an answer from you soon
Best regards
Pedro Assunção
Answer:
Dear Pedro, this article -#24217#- is a primer for steel, aluminium, wood and GRP. You will need 1-2 layers. After this you can use the hard antifouling: -#66680#-, here you will need 2-3 layers. On the side of the antifouling product also are processing instructions. The maximum time before immersion are 6 month. Yours SVB-team.
General question
Question:
Lennart C.
asked
on Jan 5, 2021
Hi
How many layer do I need of this Product Before I use antifouling,
Answer:
Dear customer, please email info@svb24.com in this case.