INTERNATIONAL

MICRON 300 Self-Polishing Antifouling

Only 3 in stock
SVB price: €123.49 (€49.40 / l )
You save: 54%
€265.94
Excl. VAT, excl. shipping costs.
This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
pcs.
€123.49 This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
Buy
Available variants:
Item no.
40748
EAN
5035686882195
Model no.
YBB647/2.5AR
Description
INTERNATIONAL - MICRON 300
Antifouling type
Self-polishing antifouling
Colour
Dark grey
Colour code
YBB647
Contents
2.5 l
Area of application
Salt water, Fresh water, Brackish water / Mixed operation
Hull material
GRP, Wood, Steel
Method of application
Roller, Brush, Spray gun
Biocide-free
No
Immersion after
12 h @ 15 °C
Max. time before immersion
12 months
BAuA-No.
N-68931
Yield (theoretical)
25 m²
No. of coats (recommended)
2 - 3

Product details

Micron 300 is an antifouling product effective against fouling organisms; slime, aquatic plants and animals. MICRON 300 is a powerful antifouling agent, suitable for professional and non-professional use on ships in fresh and salt-water. Thanks to its constant polishing effect, the system offers effective protection for up to two years and prevents the build-up of thick layers. The surface becomes smoother and smoother, which ensures reduced friction, while maintaining optimal biocide release, even during lay times. MICRON 300 can be applied up to 12 months before launching. Suitable for GRP, wood, steel and lead. Yield: 9 m²/l.

Processing instructions

Technical specifications

  • Processing temperature: +5° C to +35° C
  • Drying time at 15 °C: 45 minutes (dust dry)
  • Overcoating time at 15 °C: min. 10 hours

Can be applied to most antifoulings provided they are in good condition. Not to be used in combination with VC17m or PTFE-containing antifoulings.

For coated surfaces
  • In good condition: Remove fouling, impurities and paint residues completely and then sand wet with 80-120 grit sandpaper (not dry!). If existing antifouling is not compatible or unknown, seal with suitable barrier coat.
  • In poor condition: Use Interstrip to remove all antifouling residues.

GRP/Blank gelcoat: Make sure the surface is clean, dry, dust-free and in a generally good condition. Use Thinner No. 3 for degreasing. Coat the surface to be treated with Gelschield 200 (osmosis protection) or Primocon. Then apply two coats of MICRON 300. Renew every season.

Wood: Make sure that the surface is clean, dry as well and dust-free and in generally good condition. Use Thinner No. 3 for degreasing. Prime with Interprotect or Primocon. Then apply two coats of MICRON 300. Renew every season.

Steel/lead: Make sure the surface is clean, dry, dust-free and in a generally good condition. Use Thinner No. 3 for degreasing. Prime with Interprotect or Primocon. Then apply two coats of MICRON 300. Renew every season.

Not suitable for use on aluminium or galvanised surfaces.

These antifoulings / paints may not be delivered by us to Switzerland, the Netherlands and Belgium.

Use biocidal products with care. Always read the label and product information prior to use.

Product safety

Please note the following hazard warnings:

Hazard pictograms
Signal word
Warning
Hazard warnings
Flammable liquid and vapour.
Causes skin irritation.
May cause an allergic skin reaction.
Very toxic to aquatic life with long lasting effects.
Causes serious eye damage.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Read label before use.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep cool.
Avoid release to the environment.
Wear protective gloves/protective clothing/eye protection/face protection.
IF ON SKIN:
IF IN EYES:
Immediately call a POISON CENTER or doctor/physician.
Take off contaminated clothing and wash before reuse.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Dispose of contents/container to …
H226, H315, H317, H410, H318, P101, P102, P103, P210, P235, P273, P280, P302, P305, P310, P362, P303+P361+P353, P501

Documents

en-flag Datasheet
PDF, 195,62 KB
en-flag Safety datasheet
PDF, 196,00 KB
de-flag Datasheet
PDF, 201,30 KB
de-flag Safety datasheet
PDF, 208,65 KB
es-flag Datasheet
PDF, 195,40 KB
Item no.: 40748
es-flag Safety datasheet
PDF, 204,93 KB

What other SVB customers have to say

100% real reviews
Jean Pierre V.
Flag of France Verified purchase
Not happy
The product is very good but when you order a black product you are not sent a gray product I did not have time to send it back to you so I went gray but it is not normal
Daniel C.
Flag of France Verified purchase
Good product delivered in good time
Jürgen K.
Flag of Germany Verified purchase
As always I am used to SVB's prompt delivery to SVB
View all ratings

Rate product

How would you rate this product?
Disappointed
Completely fails to meet my expectations
Poor
Only some expectations are met
OK
Meets my basic expectations
Good
Slightly better than my general expectations
Excellent
Fully exceeds my expectations
Click on the stars to rate

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .

Question about delivery contents

Question:
User image of Ronaldo P.
Ronaldo P. asked
on Sep 3, 2020
Flag of English Desculpem, mas a minha necessidade é a Micron 350 cód.: 40729 (YBB624). COMO PROCEDER, POR FAVOR?
Answer:
User image of Cory V.
Cory V. answered
on Oct 10, 2022
Dear customer, please email: info@svb-marine.es in this case.