High-performance, self-polishing antifouling with effective protection from organisms such as algae. MICRON 350 is a high-performance SPC antifouling (self polishing copolymer), suitable for professional and consumer use on ships in fresh and salt water.
This product offers up to two years of performance while avoiding the build-up of thick layers. The smooth surface produced ensures reduced friction, while optimal biocide delivery is maintained, even while the vessel is docked for longer periods of time. Suitable for GRP, wood, steel and lead. Yield: 10 m²/l.
- Processing temperature: +5° C to +35° C
- Drying time at 15 °C: 45 minutes (dust dry)
- Overcoating time at 15 °C: min. 10 hours
Can be applied to most antifoulings provided they are in good condition. Not to be used in combination with VC17m or PTFE-containing antifoulings.
For coated surfaces
- In good condition: Remove fouling, impurities and paint residues completely and then sand wet with 80-120 grit sandpaper (not dry!). If existing antifouling is not compatible or unknown, seal with suitable barrier coat.
- In poor condition: Use Interstrip to remove all antifouling residues of surface you will be painting.
GRP/Blank gelcoat: Make sure the surface is clean, dry, dust-free and in a generally good condition. Use Thinner No. 3 for degreasing. Coat the surface to be treated with Gelschield 200 (osmosis protection) or Primocon. Then apply two coats of MICRON 350. Renew every season.
Wood: Make sure that the surface is clean, dry as well and dust-free and in generally good condition. Use Thinner No. 3 for degreasing. Prime with Interprotect or Primocon. Then apply two coats of MICRON 350. Renew every season.
Steel/lead: Make sure the surface is clean, dry, dust-free and in a generally good condition. Use Thinner No. 3 for degreasing. Prime with Interprotect or Primocon. Then apply two coats of MICRON 350. Renew every season.
Not suitable for use on aluminium or galvanised surfaces.
These antifoulings / paints may not be delivered by us to Switzerland, the Netherlands and Belgium.
Use biocidal products with care. Always read the label and product information prior to use.
Sale to end consumers only and in conventional quantities.
Please note the following hazard warnings:
Customers ask customers
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: firstname.lastname@example.org or by phone on: +49 (0)421 57290510 .