NASA MARINE CLIPPER Wireless Wind (plus sensor)

Only 5 in stock
SVB price: €420.13
Excl. VAT, excl. shipping costs.
This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
€420.13 This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
Available variants:
Item no.
NASA - CLIPPER Wireless Wind
11 cm
Installation height
65 mm
Installation width
83 mm
With transducer
Colour display
11 cm

Product details

Wireless wind display system with NASA Clipper display and NMEA0183 output. The included data box is mounted below deck and powered via the 12V on-board electrical system. Via a cable connection, the receiver can then pass on the wind direction and wind speed data to a NASA Clipper or another NMEA0183-compatible display.
The mast unit is supplied with electricity by a solar cell. Once fully loaded (after about 150 hours in bright sunlight), the battery pack will guarantee an operating time of up to 2000 hours or 15,000 hours in standby mode.
  • Wireless transmission of wind speed and direction
  • NMEA0183 data output (MWV), 4800 baud
  • Display on NASA Clipper instruments
  • Easy Installation: No cable is required inside of the mast
Comes with: Wireless mast unit, Data box, NASA Clipper display


en-flag Manual
.PDF, 183,34 KB
de-flag Manual
PDF, 472,39 KB

What other SVB customers have to say

100% real reviews

15 customer reviews

4.5 (out of 15 ratings)
2 Stars
1 Stars
  • Advantages
  • Connection options (1)
  • Screen brightness (1)
  • Operation (1)
  • Range of functions (1)
  • Delivery contents (1)
  • Price/performance ratio (1)
  • Readability (1)
  • Disadvantages
  • Quality (1)
  • Mounting/Installation (1)
Peter L.
by Peter L. Flag of Germany 7/30/2020 Verified purchase
Everything as it should be
Gerhard M.
by Gerhard M. Flag of Germany 9/7/2017
The too short manual must be charged to the manufacturer and not the dealer.
Germar B.
by Germar B. Flag of Germany 8/3/2017 Verified purchase
Need more technical information
View all ratings

Rate product

How would you rate this product?
Completely fails to meet my expectations
Only some expectations are met
Meets my basic expectations
Slightly better than my general expectations
Fully exceeds my expectations
Click on the stars to rate

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: or by phone on: +49 (0)421 57290510 .

  • More "Customers ask customers" available in the following languages :
  • Flag of Français
  • Flag of Deutsch
  • Flag of Italiano

Technical question

User image of Andreas K.
Andreas K. asked
on Jun 25, 2018
Flag of English Nasa wireless wind system: Die Receiver-box wird an das 12V-Netz mit einem vorbereiteten Kabel angeschlossen. Der Stecker in die Receiver box ist vormontiert. Das Kabel hat zwei Adern: Rot und schwarz-rot! Welches ist Plus, welches Minus???
User image of Sven W.
Sven W. answered
on Dec 21, 2018
Hallo Andreas, das rote Kabel ist die Plusleitung und das schwarze Kabel die Minusleitung. Ihr SVB-Team.
User image of Jan O.
Jan O. asked
on Apr 8, 2020
Flag of English Hello, can I connect NASA Clipper Wireless Wind to Garmin GPSmap 922 plotter with NMEA 0183 to NMEA 2000 adapter, please? Thanks John
User image of Arne C.
Arne C. answered
on Apr 27, 2020
Hello Jan, Yes this were possible. Eg. with this converter or other multiplexers. Important: Only prepare connection over the NMEA2000-network, not directly between devices
User image of Glenn D.
Glenn D. asked
on Jun 9, 2021
Flag of English #84537# NASA wireless wind system: does this work on a 16m mast?
User image of Cory V.
Cory V. answered
on Mar 10, 2023
Dear customer, it should work fine.
User image of Gaspard W.
Gaspard W. asked
on Apr 18, 2023
Flag of English When I connect everything according the instructions, I'm only getting two lines on the display. No reading. The transmitter and received don't seem to be communicating. The Transmitter has been under the sun for 12 hours now. Did anyone else experienced that issue ?
SVB expert image
Tony K. answered
on Apr 18, 2023
This means the display is not receiving the NMEA data from the receiver box. Is the RED led on the receiver box flashing? If not, it isn't communicating with the mast head unit.

General question

User image of JUAN DIEGO G.
on Apr 27, 2022
Flag of English Hello, I am interesting in Wireless wind display system with NASA Clipper display and NMEA0183 output. But I am only interesting in data box for nmea 0183 and the Wireless Wind Sensor. I dont need the CLIPPER display because I have my own plotter and I would like to use it with nemea 0183 sentences. Is it possible to buy only box for nmea 0183 and the Wireless Wind Sensor? how much?. Thank your
User image of JUAN DIEGO G.
JUAN DIEGO G. answered
on Apr 27, 2022
my email
User image of Felix W.
Felix W. answered
on Apr 27, 2022
Hello Juan, please check the artikel #84536#
User image of JUAN DIEGO G.
JUAN DIEGO G. answered
on Apr 27, 2022
thaks so much for your soon answer