SILENT WIND Wind Generator Pro / 24 V / 450 W
SILENT WIND Wind Generator Pro / 12 V / 420 W
The generator, developed by sailors for sailors, delivers particularly high performance even at low wind speeds and is suitable for all climate zones. Voltage: 12 V.
SVB recommends the following for this item
Product details
Boost function
An MPP control for small wind generators makes little technical sense. However, with an adjustable boost function it is possible to increase output in low wind conditions, and optimise output in strong winds. The adjustable boost frequency influences the detent torque so that, for example, an earlier charging cycle is guaranteed in light winds.
Bluetooth function
The controller has an illuminated LCD display on which all relevant data can be read, and information about all Bluetooth-capable Android or iOS devices can be displayed. The necessary configuration settings can also be made via the Bluetooth interface.
Stop function
The SILENTWIND Generator Pro automatically stops or significantly reduces the number of revolutions when the batteries are fully charged and when wind speeds are too high. In this way, only a small amount of power goes into the battery and self-discharge is prevented. The wind generator can also be stopped manually via a button beneath the display on the charge controller. An LED indicates the stop function is active.
Features at a glance
- 3-phase, brushless alternator with powerful magnets
- UV-resistant carbon fibre rotor blades
- Low noise
- External antenna for longer range
- Extremely light weight of 6.8 kg
- Improved performance
- Fast start of the charging process
- Higher resistance under strong wind
- Universal use at low, medium and high wind speeds
- Durable and low maintenance
- Supplied with an external hybrid MPPT charge controller with LCD display for all relevant operating data, such as W, A, V, Ah and kWh. A solar panel up to 300 Wp can additionally be connected.
Technical specifications
Generator type | Powerful magnet generator, 3-phase, AC |
No. of blades | 3 |
Rotor diameter | 1.15 m |
Rotor blade material | CFRP - hand laminated |
Blade weight | 150 g / blade |
Nominal voltage | 24V DC |
Wattage | 450 watts |
Nominal wind speed | 14.5 m / s |
Start-up wind speed | 2.2 m / s |
Charge cycle start | 2.5 m / s |
Wind tunnel safety test | up to 122 km / h |
Speed range | 550 - 1700 rpm |
Generator total weight | 6.8 kg |
Tube diameter | 48 mm |
Note
- Supplied with a battery temperature sensor, which is connected to the charge controller via a 2-pin plug.
- Unlike previous SILENTWIND hybrid charge controllers, the stop function of the latest WWS04-xx-xx types can only be activated via the "scan" button on the controller itself and no longer via a separate ON-OFF switch.
Documents
Accessories
Customers also bought
Similar items
Comparison with other products
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .