Article Number
24204
EAN
4260416460270
Model no.
24204
Description
SEATEC - Epoxy resin
Mixing ratio
100:60
For substrate
GRP, Wood, CFRP
Method of application
Roller, Brush, Filler
Sandable
Yes
Pot life
30
min
Curing time
8
h @ 20 °C
Fully cured
5
Days
with pump
No
SVB recommends the following for these items
Product details
Unfilled, solvent-free epoxy resin for a versatile range of applications. The resin is suitable for lamination, gluing, filling or coating. It has excellent adhesion to many materials (GRP, wood, metal, polystyrene, concrete, etc.) and very good impregnation properties when used with glass fabric. If necessary, the resin can be used with suitable fillers as an adhesive or putty. After curing, both components form a high-strength, water-resistant bond or coating. For this purpose, resin and hardener are mixed together in a precisely dosed weight ratio of 100:60 (by volume). Pot life is approx. 30 minutes (+20 °C). The final mechanical strength is reached after approx. 5 days (+20° C). The processing temperature of SEATEC EPOXY RESIN should be at least +10° C. The epoxy resin is not non-yellowing under UV exposure. Therefore, the final coat should be a UV-resistant 2 component varnish.
Product safety
Please note the following hazard warnings:
Hazard pictograms
Signal word
Warning
Hazard warnings
Causes skin irritation.
May cause an allergic skin reaction.
Causes serious eye irritation.
May cause respiratory irritation.
May cause damage to organs through prolonged or repeated exposure.
Toxic to aquatic life with long lasting effects.
Harmful to aquatic life with long lasting effects.
Flammable liquid and vapour.
Causes serious eye damage.
Dispose of contents/container to …
Store locked up.
In case of fire: Use … for extinction.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Immediately call a POISON CENTER or doctor/physician.
Wear protective gloves/protective clothing/eye protection/face protection.
Use only outdoors or in a well-ventilated area.
Do not breathe dust/fume/gas/mist/vapours/spray.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
Contains (name of sensitising substance). May produce an allergic reaction.
Contains epoxy constituents. May produce an allergic reaction.
May cause an allergic skin reaction.
Causes serious eye irritation.
May cause respiratory irritation.
May cause damage to organs through prolonged or repeated exposure.
Toxic to aquatic life with long lasting effects.
Harmful to aquatic life with long lasting effects.
Flammable liquid and vapour.
Causes serious eye damage.
Dispose of contents/container to …
Store locked up.
In case of fire: Use … for extinction.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Immediately call a POISON CENTER or doctor/physician.
Wear protective gloves/protective clothing/eye protection/face protection.
Use only outdoors or in a well-ventilated area.
Do not breathe dust/fume/gas/mist/vapours/spray.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
Contains (name of sensitising substance). May produce an allergic reaction.
Contains epoxy constituents. May produce an allergic reaction.
H315, H317, H319, H335, H373, H411, H412, H226, H318, P501, P405, P370+P378, P305+P351+P338, P310, P280, P271, P260, P210, P102, P101, EUH208, EUH205
Documents
Safety datasheet
PDF, 716,28 KB
Safety datasheet
PDF, 484,69 KB
Safety datasheet
PDF, 732,82 KB
Safety datasheet
PDF, 486,40 KB
Safety datasheet
PDF, 725,66 KB
Safety datasheet
PDF, 495,18 KB
Safety datasheet
PDF, 732,38 KB
Safety datasheet
PDF, 487,07 KB
Accessories
Customers also bought
SIKA
Sikaflex - 291i Marine Sealant / Filler
from
€7
14
6 variants
Mixing Cups with Lid
from
€0
80
2 variants
-23%
SEATEC
EPOTEC Epoxy Primer
€29.37
from
€22
65
2 variants
-22%
SEATEC
Epoxy Putty
€26.85
from
€20
97
2 variants
-22%
SEATEC
Glass fiber mat 300 g
€9.20
from
€7
14
4 variants
-27%
SEATEC
Glass fabric 200 g
€12.56
from
€9
20
2 variants
Similar items
YACHTCARE
Dosing Pumps for Epoxy Resin
only
€22
65
10
-6%
YACHTCARE
2-Component Epoxy Resin / for pump application
€57.86
only
€54
58
2
WEST SYSTEM
206 Slow Hardener / 1 kg
only
€61
30
13
WEST SYSTEM
206 Slow Hardener / 0.2 kg
only
€22
65
8
WEST SYSTEM
206 Slow Hardener and 105 Epoxy Resin / 6 kg
only
€197
44
10
WEST SYSTEM
Slow Hardener 206 and Epoxy Resin 105 / 1.2 kg
only
€58
78
29
WEST SYSTEM
Fast Hardener 205 / 1 kg
only
€61
30
21
WEST SYSTEM
205 Fast Hardener / 200 g
only
€22
65
6
WEST SYSTEM
Fast Hardener 205 and Epoxy Resin 105 / 6 kg
only
€197
44
10
WEST SYSTEM
Fast Hardener 205 and Epoxy Resin 105 / 1.2 kg
only
€58
78
93
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
Technical question
Question:
Jose B.
asked
on Mar 4, 2019
Hello
I`m going to use for the first time Seatec epoxy Harz 900g for laminating. I just notice the hardener is 275g so if the mix is 2:1 something is wrong. please info.
Thank you
Answers:
You use the clear plastic mug supplied to do your 2:1 mix. I only used a small amount of the epoxy approx 400g. Guess if you are using all 900g of the epoxy you will need more hardner. Hope this helps answer your question
Thank you for answer but if the hardener and resin does not match why seatec sell it that way,? Do not make sense.
Regards
Hello, You have bought 600g resin and 300g hardner (total 900g). But you mix them by volyme (not weight). The resin and hardener specific gravity are not the same. I hope that this help?
Thank you for answer, i was informed that by weght the mix is 100:44, so it is ok by volume 2:1 (625g resin and 275g hardener).
Regards
Question:
Andy P.
asked
on Oct 29, 2020
Can I mix copper powder in with this to create an copper based anti-foul layer for the hull?
Answer:
Dear customer, we cannot advise on this unfortuantely.
Question:
Tine B.
asked
on Apr 16, 2023
Hello, do the Yachtscare dosing pumps for epoxy resin OR standard dosing pumps with the thread DIN45 (cca 45mm diameter) fit the bottle’s ?
If you answer the question please state the size of the bottle you have (0.5kg or 1kg or 5kg). Thank you very much!
No answers yet. Be the first to answer this question!