SC302T Measuring Shunt and Tank Module / 300 A

You can extend your SIMARINE Pico system with this active SC302T measuring shunt. The SC302T measures voltages, current and temperature of the battery or battery bank. Thanks to an innovative design, the shunt also has a tank module with two resistance inputs, so you can monitor your tank levels, but also temperatures.
When the shunt is mounted in the battery NEG wire, the charge state of a 12, 24, 36, 48, 60, or 72 volt battery system can be monitored.
ONLY with a 12 or 24 volt battery bank system, the shunt can also be mounted in the battery POS line.
In addition, the SC302T can be used to monitor the current of large consumer loads such as an anchor winch. The power generation of generators such as solar panels or wind generators can also be monitored.

Technical specifications

Operating voltage	6 - 35 V DC
Temperature range	-20 to +70°C
Power consumption at 12 volts	1.2 mA
Current measurement working range	0.01 - 320 A
Maximum continuous current	300 A
Maximum peak current (<1 min)	400 A
Voltage measurement workin range	0 - 70 V
Temperature sensor (NTC 5k) working range	-15 to +80°C
Resistance input work area	0 - 65 kOhm
Dimension	120 x 120 x 60 mm