As well as using all satellite systems (TriNav), the antenna can also be programmed to use only one positioning system such as GPS or solely Galileo. Furthermore, the speed at which the data is output (baud rate) can be easily set to 4800, 38400 or 115200 baud using internal DIP switches.
The antenna can be mounted directly or on a 1" x 14TPI thread holder.
|Operating voltage:||10-30V DC|
|Current consumption:||<20mA at 12V DC|
|Supported satellite systems:||GPS, Glonass and Galileo GNSS|
|Data output:||NMEA0183 version 2.3 and 4.1
4800, 38400 or 115200 construction rate (adjustable via DIP switch)
|Sent NMEA0183 data sets:||DTM / GBS / GNS / GRS / GSA / GST / GSV / RMC / VLW / GLL / GGA / VTG / ZDA - depending on the satellite system set|
|Mounting options:||Surface mounting (3x integrated M3 threaded sleeves)
Mounting on optional 1 "x 14TPI thread holder
82.5mm (height including foot)
34.9mm (height without foot)
To set the baud rate or the satellite system using the DIP switches, the antenna must be opened. Please open the antenna with the greatest care and, if you have any questions, contact a service technician. Physical damage to the circuit board is not covered by the warranty.
Customers ask customers
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: email@example.com or by phone on: +49 (0)421 57290510 .