ATO In-line Fuse Holder
Item no.
29726
Description
In-line fuse holder
Operating voltage
12 V, 24 V
Fuse spaces
1
pcs
For fuse type
ATO
Max. system load
30
A
Max. fuse rating
30
A
Installation type
In-line
With fuse
No
Length
26
cm
IP protection class
IP55
SVB recommends the following for this item
more than 100 in stock
Product details
In-line fuse holder with protective cap for ATC or ATO blade-type fuses. When the cap is attached the fuse holder is protected against dust and water jets (IP55 standard). Supplied with cable (approx. 26 cm) that forms a ring from one side of the fuse holder to the other and must be cut through and stripped as required for the installation of cable lugs or (crimp) connectors. Fuse not included.
Installation note
Fuse holders are usually mounted as close as possible to the energy source, for example with a ring cable terminal directly to the positive pole of the battery. The wire leading from the the other half of the fuse holder is connected to the positive wire of the circuit to be protected using a suitable crimp cable lug.
Ring cable terminals and butts must be suitable for 2.5mm² to 6mm² wire size and are identifiable by their yellow colour.
Ring cable terminals: M4 (4 mm ring-inner-Ø) = SVB-# 63748, M5 = 63774, M6 = 63737, M8 = 63738, M10 = 63758.
Butt connector = 63732.
Suitable crimper = 51930.
- Max. load capacity: 32 V DC / 30 A
- Connecting cable: AWG 12 or 3.3 mm², fine-wire, tinned wire
- Cable length: approx. 26 cm
- Temperature range: - 5° C to + 85° C
- Protection class: IP55
Installation note
Fuse holders are usually mounted as close as possible to the energy source, for example with a ring cable terminal directly to the positive pole of the battery. The wire leading from the the other half of the fuse holder is connected to the positive wire of the circuit to be protected using a suitable crimp cable lug.
Ring cable terminals and butts must be suitable for 2.5mm² to 6mm² wire size and are identifiable by their yellow colour.
Ring cable terminals: M4 (4 mm ring-inner-Ø) = SVB-# 63748, M5 = 63774, M6 = 63737, M8 = 63738, M10 = 63758.
Butt connector = 63732.
Suitable crimper = 51930.
Accessories
Automotive/ATO Blade Fuse / Single
from
€0
84
Butt Cable Connector / red / 0.5 - 1.5 mm² / pack of 20
only
€2
86
Butt Cable Connector / blue / 1.5 - 2.5 mm² / pack of 15
only
€2
86
Butt Cable Connector / yellow / 2.5 - 6 mm² / pack of 10
only
€2
86
Ring Cable Terminal / red / 0.5 - 1.5 mm² / pack of 25
from
€2
86
Ring Cable Terminal / red / 1.5 - 2.5 mm² / pack of 20
from
€2
86
Ring Cable Terminal / yellow / 2.5 - 6 mm²
from
€2
86
by Hans-Peter J.
4/10/2023
Verified purchase
4/10/2023
Verified purchase
Similar items
Fuse Holder for Torpedo Fuse
only
€2
48
SEATEC
ATO Fuse Box / 6 position
only
€16
76
NEW
SEATEC
ANL Fuse Holder with Cover
only
€21
81
SEATEC
MIDI Fuse Holder / In-line
only
€5
00
NEW
SEATEC
ATO Fuse Box / 12 position
only
€20
97
NEW
SEATEC
ATO Fuse Box / 6 position
only
€16
76
NEW
SEATEC
MRBF Battery Terminal Fuse Holder
only
€5
00
NEW
TEXU400 Central Electrical System / Fuse Holder and Bus Bar
only
€319
29
NEW
VICTRON
Mega Fuse Holder / 6-way
only
€26
01
€30.00
-13%
VICTRON
Mega Fuse Holder / surface mount
only
€10
88
€12.00
-9%
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
No questions asked yet. Be the first to ask a question!