TEXU400 Central Electrical System / Fuse Holder and Bus Bar

The TEXU400 central electrical system is a DC high current distributor for up to 400A total current. Connect and protect your electrics in the smallest of spaces with this compact and clever device.

With integrated positive and negative bus bars for connecting batteries / battery banks and consumers. A shunt bridge is fitted on the split negative rail for optional integration of a summation current measuring shunt and / or main switch. All connections on the central electrical system are fused and blown fuse monitoring is implemented for all connected loads. The TEXU400 central electrical system is protected against ignition of flammable gases according to ISO8846.

Integrated LEDs light up directly on the circuit labelling so you can immediately see if a fuse has failed and needs to be replaced. This saves you the hassle of searching for the faulty fuse.

Plus rail for on-board batteries and consumers
All connection bolts are made of corrosion-resistant stainless steel. M8 bolts with flange nuts are provided throughout for high-current consumers in order to securely connect cable lugs up to 70 mm².

The TEXU400 central electrical system features an innovative MEGA fuse slot with double screw connection. This enables a professional and safe installation of several cables without needing to stack/combine cable lugs.

• 2x MEGA / AMG fuse ports (max. 400 A)
• 9x MIDI / AMI fuse ports (max. 170 A)
• 4x ATO / ATC / ATP fuse ports (max. 30 A)

Split negative bus bar
Up to 4 battery banks, as well as 11 high-current and 4 standard loads can be connected to the split negative bus bar.

Material: bus bars = T2 copper, tinned plated, bolts = AISI 304 stainless steel