I installed these bunkers both in the salon and as a reading lamp in the foreship. They make a pleasant light and look very navigable. Since the switch projects backwards beyond the base plate, it is not possible to mount it flat on the wall. It must be drilled / sawn.
Super beautiful light with very pleasant light. Only, critical note: it can not be simply "electrically connected and screwed on", but you have to drill a separate hole for the small on / off switch because the mechanical part of this switch is located on the back of the plate Approx. 12 mm - this is not always and everywhere possible or useful!
On the last delivery, the milled edges looked as if they had been worn out. I've postponed. This delivery was OK. The 24V lamps have smaller pin contacts than at 12V and do not make a proper contact. With 12V lamps everything is great.
The lights are visually appealing and well polished. Unfortunately, I had to re-solder the contact with a lamp. For this it was necessary to drill the contact. Half an hour for a new product. Should not be like that!