WEST SYSTEM 206 Slow Hardener / 0.2 kg
WEST SYSTEM 206 Slow Hardener / 1 kg
206 Slow hardener is an epoxy hardener, which consists of a low viscosity mixture of polyamines. It can be mixed with the 105 Epoxy resin in the ratio of 5 parts resin to 1 part hardener, the cured mixture yields a rigid, high-strength, moisture-resistant solid...
Product details
The hardener is typically used for larger areas and bondings that take a longer time. Pot life at 21°C: 25 - 30 minutes. Hardens to a solid mass in about 9 hours at 21°C and reaches full hardening after about nine days.
- Bonding
- Filleting
- Affixing hardware and flowing out to create a base for hardware
- Fastener bonding
- Laminating
- Filling
- Laminating with fiberglass
- Barrier layering
Substrates:
- Wood
- Fiberglass
- Composites
- Various metals
Hardener overview
Hardener | Resin/hardener use | Minimum temp | Pot life at 22 °C (100g) | Processing time at 22 °C (thin film) | Curing time at 22 °C (thin film) |
205 Fast Hardener | General bonding and coating | 5 °C | 9-12 minutes | 60-70 minutes | 6-8 hours |
206 Slow Hardener | General bonding and coating | 16 °C | 20-25 minutes | 90-110 minutes | 10-15 hours |
ATTENTION: Not available in Switzerland!
Product safety
Please note the following hazard warnings:
May cause respiratory irritation.
May cause an allergic skin reaction.
Harmful if swallowed.
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Causes severe skin burns and eye damage.
IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
Dispose of contents/container to …
Store locked up.
If skin irritation or rash occurs: Get medical advice/attention.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Keep out of reach of children.
Take off contaminated clothing and wash before reuse.
Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
Immediately call a POISON CENTER or doctor/physician.
IF IN EYES:
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid release to the environment.
Contaminated work clothing should not be allowed out of the workplace.
Wash … thoroughly after handling.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Documents
Accessories
Customers also bought
Similar items
Comparison with other products
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .