STERLING Alternator to Battery Charger / 12 V / 130 A
STERLING Alternator to Battery Charger / 12 V / 80 A
Compatible with gel/acid/AGM and LifePo4 batteries Temperature compensated charging Monitoring of the LM-temperature Incl. sensors for battery and alternator Various safety functions
STERLING Alternator to Battery Charger / 12 V / 160 A
compatible with gel/acid/AGM batteries temperature compensated charging monitoring of the LM-temperature incl. sensors for battery and alternator various safety functions
STERLING Alternator to Battery Charger / 24 V / 100 A
compatible with gel/acid/AGM batteries temperature compensated charging monitoring of the LM-temperature incl. sensors for battery and alternator various safety functions
SVB recommends the following for this item
Product details
This STERLING alternator to battery charger combines all advantages of high-performance regulators with simple installation. The device is installed inbetween the alternator and starter and consumer batteries. Old technology, such as isolators, charging relay or battery switches is replaced by this STERLING-charger. After engine start, the device charges the starter battery (standard characteristic) for a short time. Then, the device charges the consumer battery with anoptimal IUoUo characteristic. 2 temperature sensors for regulators and consumer battery ensure, even at high load currents, optimised operating conditions.
The LB-charger can be easily expanded with a remote control with display. All important parameters of the charging system are displayed. We recommend a remote control without shunts (item number: 32443).
Details- Compatible with gel/acid/AGM/LiFePO4 batteries
- Temperature compensated charging
- Monitoring of the LM-temperature
- Incl. sensors for battery and alternator
- Optional remote control
- Various safety functions
- Lima & batteries connection bolt: 5/16" (approx. 8 mm)
Note on charging LiFePO4 batteries
- Only lithium batteries that have an integrated or external BMS (Battery Management System), which includes essential safety features such as overcharge and deep discharge protection, temperature monitoring, balancing, etc., may be charged. Information on whether your LiFePO4 battery has an integrated BMS with the corresponding range of functions or whether your LiFePO4 must be equipped with an external BMS should be found in the product description, data sheet or installation/operating instructions of the battery.
- The unit provides 14.6 V boost voltage and 14.4 V float charge voltage when set for LiFePO4 batteries.
Make sure that your lithium battery is compatible with these voltages. You should be able to find reliable information in the data sheet of your LiFePO4 battery or in the operating/installation instructions under "Technical data".
Documents
Manual
9/24/2019
Verified purchase
Customers also bought
Similar items
Comparison with other products
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
- More "Customers ask customers" available in the following languages :
-
