Cristiano P.'s SVB Skipper Profile
This profile is set to private.
Cristiano P. asked these questions
1
A question about:
Supersup Smart Bilge Pump 1100 / 12 V
Cristiano P.
on Apr 15, 2021
I would ideally need the hose to be connector parallel to the pump, so would need to use a 90º elbow between the pump body and the non-return valve. My question is what is the thread size on the pump body?
2
A question about:
12V Starter Motor / Yanmar 3JH2 / 3JH3 / 4JH / 4JH2
Cristiano P.
on Aug 27, 2022
Is this starter compatible with the 3JH5E motor?
Answer:
Cory V. answered
on Mar 10, 2023
Dear customer, its only suitable for the models listed in the list above.
Cristiano P. already answered these questions
1A question about:
DSC-Handheld Radio HX890E / black
Peter W. asked
on May 6, 2021
Is it possible to use channels L1, L2 and L3 in the Standard Horizion 890E VHF ?
Answer:
Cristiano P. answered
on May 8, 2021
Yes it does have those channels, you should configure the radio for the Sweden region and those channels will become visible.
2A question about:
Gelcoat
António B. asked
on Apr 16, 2021
Hi! I would like to know what quantity this product is, and if i can mix matt aditive color aditive with him, and if you do have some kind of matt aditive. Many thanks.
António Batel
Answers:
Cristiano P. answered
on Apr 16, 2021
The can is 500 grams, and I mixed colour additive (yellow and brown) to make a cream colour. Remember to adjust the colour first, then only when you are happy with the colour do you add in the hardner catalysing component.
António B. answered
on Apr 16, 2021
Thank you for your answer. I have a white fade color, I was thinking of making the white gelcoat with black to match it. Are you agree with this? Or should I get a yellow or brown instead?
Cristiano P. answered
on Apr 16, 2021
For your situation black is probably better, my case the colour I needed to match was a cream, so of course needed the yellow brown.
I actually recommend getting several colours (they are not expensive), so you can play mixing.
In any case take a look at this video, he gives a really nice explanation on how to do it.
https://www.youtube.com/watch?v=yoURRmkD8MY
António B. answered
on Apr 16, 2021
Ok i get it! And with matting additive, do you know something for that?
Cristiano P. answered
on Apr 16, 2021
For matting additive I don't know, you'll have to check if the matting additive is chemically compatible with the gel coat. In my case I had only ordered the yellow from svb, locally for brown could only get a water base dye, I was worried but after some research found that it would be ok, the fact is it worked quite well. This is why I was saying get several colours, for example blue in your case may make sense. Then you will need some patience to very slowly add tiny bits of dye until the colour is the same. The matting effect may work just by the polishing work at the end of the process.
António B. answered
on Apr 16, 2021
Thank you so much for your reply!! I think I go for the black and yellow too. The video really helps! Thank you!!