Girts A.'s SVB Skipper Profile
This profile is set to private.
Girts A. did not ask any questions yet.
Girts A. already answered these questions
1A question about:
Gasket for Yanmar and Volvo Penta-Saildrives
Devrim G. asked
on May 8, 2021
I have Jeannaeu Sun Oddesy 409 and the shape of the opening on my boat is round. Can I still use this item to apply to cover the opening?
I will appreciate with you response.
Thank you.
Answers:
Girts A. answered
on May 9, 2021
Hi,
I have changed the gasket on My Hanse 311, with has a rectangular opening. Distance of the opening was shorter then the oval strengthening line around the sail drive hole. No problem cutting with knife the recess off. The important issue is that the outside perimeter covers with some excess the opening on the boat.
For adhesion I used Bostik 2 component adhesive suggested by Volvo Penta and hard push - roller for better pressing of the job. Great result, so.
Ģirts, Latvia 2021
Girts A. answered
on May 9, 2021
You should be carefull with adhesive. The one suggested by Volvo Penta is Bostik NE486 and curing agent Bostikure D40. Follow the instructions about layering and time gap between them and pressing/rolling.