Daniel L.'s SVB Skipper Profile
This profile is set to private.
Daniel L. asked these questions
1
A question about:
Fuel Tank Sensor / 370 mm
Daniel L.
on Feb 15, 2019
Hello,
I just received my sensor:
"Original fuel tank sensor for D210 / D320 from April 2009 for your BAVARIA yacht, with a length of 370 mm."
and my 3 pin connector doesn't match the connector in the sensor.
I can replace the connector, but I need the functionality description of each cable:
Red= ? (I am assuming +12V)
White = ?
Yellow = ?
Many thanks,
Daniel.
Answers:
Leif Rein R. answered
on Feb 16, 2019
Hi, on my fuel provider I could use the connector directly on my Bavaria 39CR 2007, there are of course wires R 12V, and Y for grounding (plate that sits behind the aft cabin up to row) plus there goes a W to the main cable lead (must be for motor control?)
Sorry I can't help better.
Simon M. answered
on Jun 25, 2022
Hi Leif, I have same boat 2007 39'. I had a minor fuel leak from the sensor. I went to tighten and found the bolts pretty loose (one reason for this might be that the board of the berth sits on the sensor!). I went to tighten the bolts. On one bolt thread has been stripped, so it is not possible to tighten. It is possible that the leak was resolved by tightening the other 4 bolts. My question is, what do the bolts thread into? From the floatarmvdo.pdf it seems there is a plate that is bonded to the tank and the bolt is threaded intot his? Can you please confirm? Thank you, Simon