Lars T.'s SVB Skipper Profile
This profile is set to private.
Lars T. asked these questions
1
A question about:
Windlass X2
Lars T.
on Apr 12, 2018
What is that 10mm nut they are talking about wen using DIN776?
Answers:
Judith S. answered
on Apr 12, 2018
Hi Lars, At 6.8 and 13 mm, the dimension chains DIN ISO 766 and 818 are the same. The 10 mm chains -t- partition is different. According to DIN 766, the pitch is only 28 mm, ISO 818 it is 30 millimeters. With finely crafted chain nuts these different sizes can lead to problems (the first 5-6 links are still running well, but then the chain begins to jam). Our Lofrans winches are supplied as standard with DIN 766 chain nuts (with the exception of the windlass Progress II). On request, ISO sprockets are available. We also have 10, 12 and 14 mm ISO-chains in our product range. The drawing you can find here, when you click on "More infos" : https://www.svb24.com/en/category/anchoring-docking-anchors-accessories-anchor-chains-anchor-lines.html
Lars T. answered
on Apr 12, 2018
Hey Judith,
As fare Iunderstand it, the nut is nut a nut but the nuts at the gyybsy!?
Well, I’m shifting my old Lofrans Airon to to a new and hopefully not able to corode as the Airon in Aluminium.
I’m running 80 meters of 8mm chain, on the old gybsy it’s printet 8 mm DIN766.
So what I need is a gybsy just as good as the old one.
Have I done it right to make the note of using DIN766 in my order for the new Windlass.
The annoncement tells to do that!?
Don’t have any clou about 10 mm nots ore not.
It just hase to be the same size of gybsy, if You get me?
Best
Lars
Lars T. answered
on Apr 12, 2018
By the way,
Would it be possible to change in to a 10 mm chain if I get that idea a day in the future. Meaning chainging the gybsy and not the holl gear?
Best
L
Judith S. answered
on Apr 13, 2018
Hi Lars, I am not able to call you. You have passed an order for the Lofrans Project X2 with a 8mm gipsy. For your 8mm chain that is correct. It is however not possible to use a 10 mm gipsy with a 8mm chain. For the 8mm gipysy, DIN and ISO are the same. There is only a difference when you are using a 10 mm chain or higher. I put your order on hold, please let us know which Gipsy size you actually want to receive (8mm or 10mm?)
Lars T. answered
on Apr 13, 2018
Thanks, Judith.
I'm using an 8 mm. chain. My old gibsy is marked with 8mm DIN766 5/16"
Lars T. answered
on Apr 13, 2018
Ok. Please tjek the shipping address. It has to be this:
Lars Thomsen
S/V Spurven, Loja, NautiParque, Avenida 133-135
8900-227 Vila Real de Santo António, Algarve
Portugal
In my original order it says Spain witch is not correct. It hase to Portugal. I have being trying trying to correct this by mail to info@svb.de but havent got any answer from there in the matter.
Thanks in advance and thanks for Your good service!
2
A question about:
S Block with Swivel / 8 mm / plain bearing
Lars T.
on May 20, 2018
Dose this also come for 12 mm sheet?
I need one to fit the "S Mainsheet Block with Swivel, Becket and Cleat / 3-sheave" in 12 mm.
Answer:
Christian N. answered
on Jun 5, 2018
Dear Sir , thank you very much. We can offer this block to fit the needs of 12 mm lines. Please ask for an offer under info@svb.de
3
A question about:
KAWO MK 27 Special Adhesive
Lars T.
on Jun 13, 2018
Do SVB have any alternative to MK 27 Special Adhesive?
I'm in the need of an adhesive with instantly adhesive.
Best
Lars Thomsen
Answer:
Sven W. answered
on Dec 21, 2018
Dear Lars,
the MK 27 is a very fast adhesive. Alternative have a look at Epoxy Resin, our -24204-. Because we don´t know what materials you like to fix, it´s difficult for us to give you a other Option. Your SVB-team.
4
A question about:
V4A Countersunk Screws (Torx type) with Thread
Lars T.
on Aug 24, 2019
V4A Countersunk Screws (Torx type) with Thread
Can SVB deliver these screw in Ø:8mm Length &0 and 100mm?
Best Lars Thomsen
S/V Spurven of Copenhagen
Culatra, Algarve, Portugal
Answer:
Cory V. answered
on Jun 20, 2020
Dear customer, please emial info@svb24.com for special orders. Thanks.
5
A question about:
Ball Valves
Lars T.
on Aug 21, 2021
Truedesign
Why can't I find 3/4" Truedesign Ball Valves and conectors?
Best
Lars Thomsen
Answers:
Tero E. answered
on Aug 21, 2021
Hello Lars,
Maybe SVB run out of that size. They exist and may be found with the google. When I changed my thruhuls to Trudeign I had to find all the pieces from couple of sellers. It was exellent choice. They were simply to assemple and they work easily. I recommend.
Claus L. answered
on Aug 21, 2021
If I choose the second option under descriptions:
Ball-valv not the ball-valve..
Then you get 3/4 in stock...