Simon P.'s SVB Skipper Profile
This profile is set to private.
Simon P. did not ask any questions yet.
Simon P. already answered these questions
1A question about:
SeaTalkNG to NMEA0183 Converter
Michael O. asked
on Jul 17, 2021
Moin, der Konverter ist da und Dank der Infos hier auch Alles wie beschrieben gemacht: 16GB SD Karte mit FAT16 und die vom Konverter zurückgeschriebene Konfigurationsdatei sagt 0183_SPEED=38400 (für AIS wie gewünscht). Nur kommt aus dem Konverter nichts beim Plotter an (gefunden hat er Ihn). Der Konverter macht nach dem Einschaltvorgang ein stabiles LED-Signal: grün, rot, rot, rot, grün, grün - entsprechendes finde ich aber nicht in der Beschreibung.
Hat Jemand eine Idee? Danke und handbreit, Michael
Answer:
Simon P. answered
on Jul 18, 2021
The PDF manual I downloaded says this: "During normal operation, Device produces a series of five flashes every five seconds. The Flashes indicate
the state of Device interfaces over the last five seconds and have the following meaning:
• Flash #1. GREEN if data is received from the NMEA 2000 interface, otherwise RED. Note that
filters and other Device settings do not effect this signal. RED usually indicates problems at the level
of the physical connection.
• Flash #2. GREEN if data transmitted to NMEA 2000. This signal may be RED if nothing was received
from NMEA 0183, or conversion was prohibited by the filter settings (see Section VI).
• Flash #3. GREEN if data was received from NMEA 0183 interface. A RED signal may indicate
the incorrect speed of the NMEA 0183 port or problems with the physical connection.
• Flash #4. GREEN if data was transmitted to NMEA 0183. As there is no confirmation of reception,
this signal does not mean that data was received by any listener. RED means that Gateway
has nothing to send, because nothing was received from NMEA 2000 or conversion is prohibited
by filters (see Section VI).
• Flash #5. GREEN if no checksum error found in incoming NMEA 0183 messages (only messages
not blocked by filters are verified). This signal is also GREEN when nothing is received from
NMEA 0183 at all."
Hope this helps...
2A question about:
Rigging Heat-Cutter
Rui S. asked
on Jan 7, 2021
Hello, i received the Rigging Heat Cutter. I did not received any cutter blade. What is the procedure to solve this issue?
Answers:
Simo H. answered
on Jan 7, 2021
Hi, I bought mine last summer and the cutter blade was loose in the package. I meant to throw in the trash with the package.
Arne O. answered
on Jan 7, 2021
Contact SVB directly - mail to :info@svb24.com - or call them via the number stated on your account page.
Simon P. answered
on Jan 8, 2021
Same here.
I think SVB should attach the blade to the cutter box using sticky tape, so that it cannot be accidentally discarded with the packaging.
3A question about:
Marine - Genoa T-Tracks / size 1 / 20 x 3 mm
Robert H. asked
on Sep 28, 2019
Hello SVB Team !
If 2 meters of 25x4 mmT-track ordered , can you supply it as piece or 2x 1 meter ?
Answer:
Simon P. answered
on Sep 30, 2019
I ordered 1m and mentioned that it would be ok to cut it in half if it made transport easier. SVB sent two 500mm lengths. Just say what you want in the comment in the order.
4A question about:
Marine - Genoa T-Tracks / size 1 / 20 x 3 mm
Rui D. asked
on Jun 20, 2019
Can Pfeiffer T-Tracks be used as mainsail traveller?
Answers:
Sven W. answered
on Jul 30, 2019
Dear Rui, the T-Tracks aren´t constructed for mainsails. Please notice the X-Tracks -11974- This one is for mainsails and have a lot of accessories. Your SVB-team.
Simon P. answered
on Sep 30, 2019
I ordered 1m and mentioned that it would be ok to cut it in half if it made transport easier. SVB sent two 500mm lengths. Just say what you want in the comment in the order.