Willem R.'s SVB Skipper Profile
This profile is set to private.
Willem R. asked these questions
1
A question about:
SILIC ONE Biocide-Free Antifouling
Willem R.
on Mar 29, 2018
Do you haven the SILIC ONE propeller kit ?
Answer:
Sven W. answered
on Dec 21, 2018
Dear Willem,
we haven´t SILIC ONE Propeller kit in our product range, but we got Hempel as a supplier, so we are able to order it for you. If you have still interest in this Product, please contact us per: info@svb24.com Your SVB-team.
2
A question about:
Fast Hardener 205 and Epoxy Resin 105 / 0.6 kg
Willem R.
on Mar 1, 2020
Do you have west system filer 404 ?
Answer:
Cory V. answered
on May 29, 2020
Dear customer, please email info@svb24.com for special order inquiries.
3
A question about:
EV-100 Tiller Pilot
Willem R.
on Feb 2, 2022
Est ce possible de connecter le pilot automatique EV100 avec traceur de carte C90 Raymarine ?
Answers:
Antoine G. answered
on Feb 3, 2022
Bonjour Willem,
Ce n'est malheureusement pas possible car le c90 n'a pas d'interface SeatalkNG.
Willem R. answered
on Feb 3, 2022
Et avec le Convertisseur SeaTalk1 / SeatalkNG ????
Et le simrad 32 ?
Antoine G. answered
on Feb 16, 2022
Bonjour Willem,
Cela ne fonctionnera pas non plus. Le c90 n'est tout simplement pas compatible, même avec un adaptateur.
4
A question about:
ZEUS³S - 9 / touch + buttons
Willem R.
on Nov 7, 2023
Kann ich den Zeus mit meinem Raymarine-Netzwerk verbinden? Laut B&G könnte dies mit einem SeaTalk1-zu-SeaTalkNG-Konverter-Kit erfolgen? Hat jemand Erfahrung damit oder mit einem Vulcan?
Answers:
Sven W. answered
on Nov 7, 2023
Hello Willem, yes this is possible with a similar adapter: -#60707#-. Yours SVB-Team.
Willem R. answered
on Nov 8, 2023
Vielen dank für ihre schnelle Antwort.
Aber...
I got the answer from your colleague that it was impossible ?
"Dear Customer,
Thank you for your inquiry. please see the response from the technician:
den ST800 Geber bekommt er in keinem Fall an den Vulcan 12R angeschlossen und bei dem P97 Geber
geht dies auch nur wenn es sich um einen NMEA2000 fähigen Geber handelt. Wenn es sich um einen
Fischfindergeber handelt der vorher an dem Raymarine angeschlossen war, geht dies ebenfalls nicht.
Mit freundlichen Grüßen / Best regards
Cory Van Ryk
International Sales Manager, MBA"
I only need that cable ??? or do I also need SeaTalk1-zu-SeaTalkNG-Konverter-Kit.
Because in my Raymarine network are seatalk1 instruments (st50 & st4000 autopilot.
5
A question about:
ZEUS³S - 9 / touch + buttons
Willem R.
on Nov 13, 2023
Es ist auch möglich, die Verbinding via der nmea0183/video Eingang mit multiplex 3usb herzustellen hab ich gefunden. Ist dass richtig? und besser als der SeaTalk1-zu-SeaTalkNG-Konverter-Kit ?
Answer:
Sven W. answered
on Nov 22, 2023
Hello Willem, please use our direct contact option: info@svb24.com // Yours SVB-team.
6
A question about:
SeaTalk1 to SeaTalkNG Converter Kit
Willem R.
on Jan 22, 2024
Ik wil mijn Vulcan verbinden met mijn seatalk1 net waarin een st50 wind en log en een st 60 controle eenheid voor de +st4000 autopilot zit. De bedoeling is om de verbinding te maken via st60 eenheid zodat ook de stuurautomaat met de vulcan verbonden is. Wat heb ik daar voor nodig. Bovendien wil ik de dieptemeter p97S en een navico compas beide nmea 2000. Wat heb ik daar voor nodig ? Moeten beide afzonderlijk stroom krijgen ?
No answers yet. Be the first to answer this question!
7
A question about:
ZEUS S 9 / Touch
Willem R.
on Jan 22, 2024
Wat is het verschil tussen de Vulkan, zeus S en de zeus3 S
No answers yet. Be the first to answer this question!
8
A question about:
Wind Transmitter WS310 / with 20m cable
Willem R.
on Jan 28, 2024
Zijn aan de mastkabel de connectors al gemonteerd? Op de foto lijkt dat zo. Niet evident om dat door de mast te krijgen. Kunnen die connectors verwijderd worden ?en dan hergebruikt ?
Answer:
Andreas M. answered
on Jan 31, 2024
Het volgende antwoord is gemaakt met behulp van een vertaalprogramma:
Hoi Willem, de pluggen/doppen zitten aan alle kabeleinden, maar zijn relatief smal. Als de stekkerverbinding niet door de mast past, dan moet je aan één kant loskoppelen. De ontkoppeling mag niet direct achter de stekker zitten, want dan loop je het risico dat je draden uit de stekker trekt. Er moet 50 cm kabel naar de stekker overblijven. Om de kabels weer aan te sluiten, kunt u ons artikel 33149 gebruiken. De kabel is 4-aderig plus afscherming.
9
A question about:
Wind Transmitter WS310 / with 20m cable
Willem R.
on Jan 28, 2024
Sur le câble de mât, les connecteurs sont-ils déjà montés ? Sur la photo, on dirait que c'est le cas. Il n'est pas évident de passer par le mât avec connecteur montés. Ces connecteurs peuvent-ils être retirés ? et réutilisés ?
No answers yet. Be the first to answer this question!
10
A question about:
Wind Transmitter WS310 / with 20m cable
Willem R.
on Jan 29, 2024
Sind am Mastkabel der WS310 die Steckverbindungen sind sie bereits montiert? Auf dem Foto sieht es so aus, als wäre das der Fall. Es
Es ist nicht einfach, mit montierten Steckern durch den Mast zu gehen. Diese Können die Steckverbinder entfernt und wiederverwendet werden?
Answer:
Andreas M. answered
on Jan 31, 2024
Hallo Willem, die Stecker/Buchsen sind an allen Kabelenden montiert, sind aber relativ schmal. Wenn die Steckverbindung nicht durch den Mast passt, dann muss man an einer Seite trennen. Die Trennung sollte nicht unmittelbar hinter dem Stecker sein, da die Gefahr besteht das man sich Litzen aus dem Stecker zieht. 50 cm Kabel zum Stecker sollten bestehen bleiben. Um die Kabel wieder zu verbinden könnten Sie unseren Artikel 33149 benutzen. Das Kabel ist 4-adrig plus Schirm.
11
A question about:
VULCAN 9FS / Touch
Willem R.
on Feb 10, 2024
Is the software updated of the vulcan 9 you are selling ?
Answer:
Andreas M. answered
on Feb 27, 2024
Hi Willem, at the moment we don´t have the device on stock. From the manufacturer we normally recieve the devices with the latest software. In any case you can update the software easy by WIFI or with micro SD chart.
12
A question about:
NMEA2000 to NMEA0183 Converter
Willem R.
on Feb 14, 2024
Can I use the yacht device nmea 2000 to 0183 to connect my vulvan to my autohelm instruments st50 wind & log and st4000+autopilot?
Can I use the yacht device to connect my vulcan to my ICm505 ?
Regards
Answer:
Andrew C. answered
on Feb 14, 2024
Unfortunately, ST50 Wind instruments have no NMEA0183 interface ( only ST50+ TRIDATA REPEATER has it). I recommend to use YDNR-02 - it has Seatalk1 interface (so ST50 can be connected), and two 0183 bidirectional ports, where you can connect ST4000 and Icom505. Also it has WiFi interface, so you can control autopilot from your tablet or any marine application (like OpenCPN).
13
A question about:
P79 In-Hull Transducer / NMEA2000
Willem R.
on Feb 19, 2024
Is it compatibel with the B&G vulcan 7R ?
Answer:
Andreas M. answered
on Feb 20, 2024
Hi Willem, if you want to connect to the 9pin sonar socket of the Vulcan 7R the sensor with our reference number 81524 is the right one. Please note that some sonar features inside the Vulcan device like downscan and sidescan are not working with in hull sensors.
NMEA2000 (N2K) sensors (as well as the one the question was asked about) are compatible to the Vulcan 7R but you need a N2K network too because all communication via N2K is done via the network, Sensors and displays are never connected directly. .
14
A question about:
DST810 GEN2 Through-Hull Transducer / SeaTalkNG / Bluetooth
Willem R.
on Feb 27, 2024
I can't install my depth transducer with o °heel (heel is > 20°). Can I correct this with the DST810 for the depth? (is not mentioned in the airmar doc.). If it is possible can it be done via the B&G Vulcan .
No answers yet. Be the first to answer this question!