Holder of the dimensions exactly as described. Installation for the reason also problem-free. Stability surprisingly good for that the holder plates are relatively thin. Recommended as a replacement for the old attitude, if not cheap but inexpensive.
Helpful?
by VLADIMIR Z.
11/6/2017
Verified purchase
Variant:
15792
Thank you for the speed of sending, fully compliant material. I recommend, for the price, for the quality of the service, and the shipping. I would certainly make other purchases on the site. Very cordially. \ r \ nNet all my best wishes for the New Year. Your Royal LePort.
Helpful?
by Jean-Marc L.
8/20/2014
Verified purchase
Variant:
15791
Product corresponding to the description. The support plate is a little small and the lack of light at the level of the fixing can pose a problem.. Other than that, this product does its job well.
Helpful?
by Christian A.
5/26/2018
Verified purchase
Variant:
15790
Good product from Vetus, but as already complained by other users, when using 10mm screws (SW17) the nuts do not fit easily when screwing in and unscrewing the bearing attachment and are actually worth a kick in the butt for the developer (everyone does it with pleasure who had to screw things in) ... again did not read the standard (is an ISO - so no German behavior here). Better to employ this engineer in sales
Works so far - Volvo Penta 2003 2-circuit cooling. Vibrates a little more at low revs, a little less at higher ones. The advantage is actually that the original damper from Volvo delaminates (rubber separates from the metal), which will probably do that too, but the construction now keeps the engine in place ... what other users should consider is the average static load , I have unfortunately installed a 100kg instead of a 75kg. Sea testing is still pending ....
Helpful?
by CLAUDE M.
5/10/2017
Verified purchase
Variant:
15791