Mit modernem Material hoffentlich geringer Arbeitsaufwand beim Betrieb.
Goods have now been installed, but not yet tested. Goods are a perfect fit. Since it is not known how hot the hose connection can get (below 12 knots speed), i.e. pure ventilation, a temperature specification would be helpful for the selection of the hose. It should also be mentioned that during assembly, for. B. Space for inserting a wedge of about 40mm is required. Otherwise, I hope to sail smoothly.
Helpful?
by Konrad H.
3/29/2017
Verified purchase
Variant:
67152
The shaft seal is just great. I installed it myself and I'm thrilled. The assembly is quite simple, provided you can pull the shaft. After I put the preload on the bellows, it was tight immediately. \ R \ nSince then I've had one dry bilge !!! Great part !!!
Helpful?
by Jyrki R.
9/10/2014
Verified purchase
Variant:
67151
Reliable and well made shaft seal, maybe the best one you can find
Helpful?
by Jens M.
1/21/2017
Verified purchase
Variant:
67152
The product is used as a replacement for a leaking radial sealing shaft seal.
The axial sealing of the PPS shaft seal is able to compensate for misalignment in any direction of the ship's shaft within limits, in which case no water leakage occurs.
The product is very easy to assemble, provided that the ship's shaft can be dismantled and the available dimensions are within the capabilities of the seal.
Helpful?
by Robert S.
5/28/2013
Verified purchase
Variant:
67152
I replaced my Volvo seal which gave me complete satisfaction after 10 years of service with this one whose diameter is better suited to my stern. Very badly I took it ... Assembly by a construction site according to the manufacturer's instructions (adjustment of the compression according to the diameter of the tree)! Watertight result when stopped but leaks when running!!! KEEP YOUR VOLVO!