Was in stock. Waiting time 10 minutes, so very short. \ R \ nEmployee even asked me how / where to cut, SUPER \ r \ nthought with you! \ R \ nVery precise cut. Thank you !
The length ordered is not that received, 20 cm is missing. The cuts are raw and not deburred so that the carriage cannot pass without reworking the part. The space at the end of the rail with the first hole is different on the right and on the left, the rail must be cut or offset so that the carriage is in the center when the rail is placed in the middle... Disappointed with the preparation of this product.
As you can see from the attached pictures, the rails were simply cut lengthwise, with genoa rails the sliders should be positioned in the same position on both sides of the boat, i.e. the perforation on both rails should be almost the same...
Of course that's not possible here, all four rails were sawn clumsily and without understanding.