Customer ratings

iWinch - Adapter for Electric Screwdrivers

Robert H.
by Robert H. Flag of Sweden 1/28/2023
Perfect for hoisting and furling sails
Aluminum is a more forgiving material against the winch. Perfect with 90 nm.
Robert A.
by Robert A. Flag of Austria 6/14/2023
Particularly suitable for the Milwaukee cordless angle drill FRAD2
I use the adapter with the Milwaukee cordless angle drill FRAD2. with 13mm drill chuck. This machine has an enormous torque of 120NM and is particularly suitable.
Customer pictures
Bertrand N.
by Bertrand N. Flag of Belgium 8/22/2022 Verified purchase
Perfect
With a 110 Nm Bosch drill/driver it is possible to operate the winches effortlessly and even to lift a man weighing more than 70 kg to the mast.
Lothar K.
by Lothar K. Flag of Germany 7/14/2021 Verified purchase
Funktioniert!
The part works fine. However, you should have a very powerful cordless screwdriver. It should be 60 Newton meters. And watch out, that thing can hit back pretty hard! It's best to hold it with both hands. Otherwise there is a risk of a sprained wrist.
Pascal C.
by Pascal C. Flag of France 4/6/2021 Verified purchase
trés utile
if you do not want to invest in a very expensive electric winch and not too much current on board
Bernard L.
by Bernard L. Flag of France 7/31/2020 Verified purchase
Super équipier
Perfect for hoisting the mainsail. It is a precious help from a certain age. Perfect.
François T.
by François T. Flag of Luxembourg 8/28/2019 Verified purchase
Enfin une solution
For sailors who are getting older ... Auxiliary system at a price quite affordable, unlike other electric cranks!
Juhani N.
by Juhani N. Flag of Finland 8/14/2020 Verified purchase
Adapter
Approximate torque need for drilling machine recommended for acouple of mast hights would be good
Henning H.
by Henning H. Flag of Denmark 6/10/2020 Verified purchase
super for turn roller furler electric
Marko P.
by Marko P. Flag of Slovenia 8/8/2019 Verified purchase
Nice gadget, but not suitable for daily use.
This adapter requires a REALLY strong electric screwdriver. Used it with a 35Nm screwdriver, which I had on board, but it was much to weak - half way raising the main sail the screwdriver begun to smoke. With a 60Nm screwdriver it worked better, but you have to be very gentle on the trigger - even at slow setting the battery screwdrivers produce too many revolutions per minute. All in all i dont feel comfortable using a 300€ screwdriver in salty spray, even the best one wont last more than a season.
Filiberto C.
by Filiberto C. Flag of Italy 10/17/2022 Verified purchase
Excellent insert for screwdrivers
Unfortunately, the screwdriver runs too fast. I have to try an impact wrench for the final judgment.
massimo M.
by massimo M. Flag of Italy 9/6/2022 Verified purchase
GOOD PRODUCT
GOOD PRODUCT
Bruno M.
by Bruno M. Flag of Belgium 7/12/2021 Verified purchase
Good product but really requires a screwdriver of at least 50 Nm. The surface marks quickly
Henri D.
by Henri D. Flag of France 6/9/2021 Verified purchase
Correspond à lusage attendu
Easy to install on the drill and winch
Nicolas R.
by Nicolas R. Flag of France 11/12/2019 Verified purchase
fait son job !
Hyper resistant alloy. Used with M18 BLDD2-502X Drill Driver MILWAUKEE BRUSHLESS 18V 5,0Ah 85 Nm. For a GV docéanis 411. Just pay attention to the return of the screwdriver, you have to hold it.
Alain S.
by Alain S. Flag of France 9/23/2019 Verified purchase
Embout de perceuse
Good light product fits well to winches without play
Jean-Claude P.
by Jean-Claude P. Flag of Belgium 7/30/2019 Verified purchase
conforme
consistent with advertising; works well at the genoa winch level but difficult for mainsail retractor; in reality this adapter is ok but be sure that your screwdriver is powerful enough otherwise the result will be disappointing
Walter C.
by Walter C. Flag of Italy 7/26/2019 Verified purchase
Ottima soluzione
It works perfectly when coupled with a suitable power drill. To hoist mainsail on First 36.7 (P13.85m) I used Makita 115Nm. It went on very well!
Peter H.
by Peter H. Flag of Germany 7/1/2019 Verified purchase
Tolles Produkt
Works really well.
Antonio M.
by Antonio M. Flag of Spain 6/20/2019 Verified purchase
Ayuda maniobras velero
Very practical accessory, although a good drill is essential. Facilitates maneuvers a lot
Arslan C.
by Arslan C. Flag of New Caledonia 4/23/2021 Verified purchase
trop cher
The tool is too expensive and does not last over time.
Antonio D.
by Antonio D. Flag of Italy 2/18/2021 Verified purchase
Excessively expensive
Xavier D.
by Xavier D. Flag of France 2/9/2021 Verified purchase
PAS UTILE PLUTOT GADJET
DIFFICULTY RELATED TO USING A SCREWDRIVER TOO BRUTAL
Olivier Q.
by Olivier Q. Flag of France 4/3/2020 Verified purchase
Envoi rapide
Too expensive for what it is, but consistent.
Alejandro P.
by Alejandro P. Flag of Spain 11/13/2021 Verified purchase
Mala calidad del material
The idea is very good. It fits perfectly on the drill and on the winch. But the material is disastrous, after the second week of use it broke.

Customer images (1) from all reviews