Poorly translated user manual. If I have interpreted it correctly, the adhesive should be applied thinly to both adhesive surfaces three times at five-minute intervals, then dry for 15 minutes, then the parts to be bonded can be joined. The patch should be pressed on smoothly with a roller (if the mounting location allows it..). The repeated thin application does not work easily, on the other hand, the small amount of adhesive supplied is hardly sufficient for this. After the repair was finally successful, the adhesive is empty, 34 of the PVC patches are still left. From this point of view, the value for money for the set is unsatisfactory in my opinion. Incidentally, the adhesive can be obtained directly from China in packs of six postage-free for moderate prices - long live globalization. Despite these difficulties and the restriction that the recommended width of the adhesive edge of 30 mm could not be observed everywhere, the repair worked well
Helpful?
by Kurt L.
5/2/2019
Verified purchase
Variant:
56588