The Acqua Signal LED series 43 resulted of very high quality. I have measured the angle for red and green Sector: exactly 112°50, as specified! Moreover, the separation between the two sectors is sharp, with almost no overlap. At the dark edges, also, the separation between light and dark - on both sides - was almost perfect. An excellent optical system! Very satisfying!
It is an excellent product that can be easily replaced with the old equivalent series of aqua signal with the traditional light bulb. \ R \ nOnly observation that the LEDs cannot be replaced in the event of a fault, but the whole headlight will have to be bought back at a considerable cost.
The mounting of the bracket is easy, only what is a bit weak from my point of view is the actual locking of the light unit in the bracket. Without a protective cage around the lantern, it was torn from its holder by falling traps and went overboard.
The cable routing does not correspond at all to the older 40 series models. The instructions given in the assembly instructions are actually impractical, as assembly would not be possible with them (there is no cable loop for assembling the connector). I improvised and finally got everything installed - now it lights up and hopefully brings the hoped-for amperage savings.
The cable routing does not correspond at all to the older 40 series models. The instructions given in the assembly instructions are actually impractical, as assembly would not be possible with them (there is no cable loop for assembling the connector). I improvised and finally got everything installed - now it lights up and hopefully brings the hoped-for amperage savings.
The cable routing does not correspond at all to the older 40 series models. The instructions given in the assembly instructions are actually impractical, as assembly would not be possible with them (there is no cable loop for assembling the connector). I improvised and finally got everything installed - now it lights up and hopefully brings the hoped-for amperage savings.
During the installation I already had the feeling that the clip assembly of the lantern in the bracket is a bit weak. In the case of a patent neck this summer and a rough tree turning, the lantern jumped out of its holder. Miraculously, she landed on the deck and lay there. The manufacturer Aqua Signal could not and would not help me with a better fastening, now the lamp is fastened with cable ties. Holds, but looks ugly.