Customer ratings

Stainless Steel Roller Fairlead

Jean M.
by Jean M. Flag of France 9/29/2020 Verified purchase
très bien
Nice product, but need longer screws 125 or 150. Allows to pass large moorings
Oliver G.
by Oliver G. Flag of Austria 2/4/2020 Verified purchase
As usual everything went well
Klese well processed, I don't know if it fits - the adria is waiting!
Prof. F.
by Prof. F. Flag of Germany 7/5/2019 Verified purchase
Product as described
u. B.
by u. B. Flag of Germany 8/9/2015 Verified purchase
Hi, it is always a pleasure to work with SVB, all orders are promptly and perfectly processed and delivered. Thanks
Reinhard K.
by Reinhard K. Flag of Germany 10/6/2014 Verified purchase
Roll-type cleat - roll-type cleat / 205 mm
Ratz Schifffahrt Keg B.
by Ratz Schifffahrt Keg B. Flag of Austria 9/1/2021 Verified purchase
gutes Produkt
The roller bearings can be called very modest, otherwise ok
jeanclaude B.
by jeanclaude B. Flag of France 9/25/2015 Verified purchase
Good product with a finish one can raw per place. One of the rollers this blocks to the tightening of the fairlead, I will have to rectify it !!!
Patrice G.
by Patrice G. Flag of France 7/23/2015
Sieht schön aus.
I have not opened up yet. But a problem is already dived: with 100 mm screws I do not go through; that is far too little, considering that the deck of older yachts, when one pulls off for the mother 1 zm, is somewhat thicker than 35 mm. For me, 125Mm would be the right thing. Now I have to find new screws that fit to the roller-lock cleats.
Anonymous
by Anonymous 7/10/2012
The cleat is very stable, the rollers run clean. We disappointed the elaboration, down around the reels the cleat is very unclean or not polished, there are rough rough, matte spots.Very badly because of flight rust ...
Josef H.
by Josef H. Flag of Germany 12/19/2016 Verified purchase
The sleeves in the rolls were too short. When the screws were tightened, the rollers were clamped and no longer turned. I had to make longer sleeves to the remedy.