For the break it's no smell that takes the lead. Clean the roller with water and hands as long as you do not wait. Fast overcoating if the weather is good. Smooth surface condition but less than a good hard matrix. On release when the boat is on the crane straps and the shortages are caused by the skates of the craft, it is necessary to wait before returning to the water. After 20 months on the Etang de Thau, there is still antifouling even after a few brush strokes under the hull before the regattas. I recommend the product.
Drying time before launching is too great with regard to the part to be made under the skates of the ber when taking on straps by the trac lift. Appearance before launching very irregular. Despite the dilution with water, it is impossible to pass it with the low pressure gun.
Somehow the product description sounded promising. When I first painted I should have been stutzig. With a can (750ml) I made two complete paintings. In previous AFs, a can (750 ml) was just a half. The AF is very thin. Visually, the color makes something, but after a season I had proper growth. In addition, MICRON WA is not cheap. Overall, I was disappointed with the product and am coming back to OFFSHORE this season.