by David F.
3/24/2023
Verified purchase
Variant:
10814
Headlining fabric
Used for ceiling panels. Excellent quality material. Note that when buying there are two different types, one with a foam fibre layer on the back and one that is just the PVC fabric. They look exactly the same in the photos.
Yes, I would recommend this product
Helpful?
by Genc S.
5/26/2016
Verified purchase
Variant:
10814
Fulfills expectations,good product.
Helpful?
by Klaus K.
10/24/2023
Verified purchase
Variant:
10814in use on a Success Marco 810
Replace the damaged interior trim with similar color and structure in the bow area of my Bav 34 sailing yacht. Can be cut well with a pair of household scissors. Back tissue makes a stable impression and does not fiber. Front is pleasant to the touch. Thermal insulation is good, you notice already when cutting only kneeling on it. I can not say much about elasticity, as it is covered with wooden boards. Test bonding around the edge of a 6mm wooden board lasts very well despite a strong tensile test. Summa Summarum - I can only recommend. Sample has sent SVB free of charge upon request. Shipping with 20 euros I find but for a pack size of 140cm very expensive.
Hallo,\r\nes lässt sich super verarbeiten, auch hier und da konnte man das Material nach ziehen. Hat sich gut in Ecken und Unebenheiten verkleben lassen.\r\nWürde ich immer wieder kaufen!
Lässt sich super verarbeiten. Insbesondere lässt sich die Verkleidung unmittelbar nach dem Verkleben noch leicht verschieben. Grandios ist auch der Versand von SVB. Nach nicht einmal 48 Stunden hatte ich den Artikel zu Hause.
can be worked well with the cloth scissors and glued well with conventional, solvent-free, dispersion adhesive for floor coverings. On temperature is to be considered however (+ 15 ° ... also the water at the trunk)
Very good material, very good fit of the material when glued to GRP and plywood boards, of course, with the offered SVB adhesive. No wrinkles, very good tension especially at rounded corners. Tip: When covering plywood eg for veneering panels, when laying around the plywood, remove the foam backing until it is applied, thus achieving the best result in the curves and no wrinkles.
The wall covering has a solid, leather-like surface. The back is not fibrous, so cutting is very easy. The only drawback: The section was cut slightly crooked; I first had to cut it into a rectangular format.