Customer ratings

Teak Outboard Motor Holding Bracket

Alexandre G.
by Alexandre G. Flag of Portugal 8/20/2021 Verified purchase
perfect for my 3.3 mercury outboard and easy to install
David C.
by David C. Flag of United Kingdom 1/4/2021 Verified purchase
Excellent
Excellent good quality teak x good service
Antonio P.
by Antonio P. Flag of Portugal 6/29/2020 Verified purchase
very satisfactory
Linda K.
by Linda K. Flag of United Kingdom 5/4/2017 Verified purchase
Nice quality and fast delivery to the UK. Looks as though it will do the job.
Karl P.
by Karl P. Flag of Germany 9/8/2023 Verified purchase
Very satisfied!
Use this teak outboard engine mount for a YAMAHA 6 HP (approx. 27-28kg identical to the 4 HP and 5 HP version) outboard engine on a Bavaria Cruiser 46 style stern railing with an additional vertical tube (this is absolutely necessary for fixing it to my railing) and am very satisfied with this product. Price/performance ratio is TOP.
Vincent M.
by Vincent M. Flag of France 7/31/2023 Verified purchase
Motor chair
Chair for the engine of the annex.
Its small size leaves room on the balcony.
Plastic rings supplied with the chair allow it to be adapted to different tube diameters.
Alain C.
by Alain C. Flag of France 4/14/2021 Verified purchase
Lacks a bit of height but quality product.
Michel G.
by Michel G. Flag of France 2/27/2021 Verified purchase
Teck massif
Bon et beau produit
Marco S.
by Marco S. Flag of Italy 4/29/2019 Verified purchase
Ottimo supporto per fb in teak
Recommended, beautiful and robust.
Marco S.
by Marco S. Flag of Italy 4/29/2019 Verified purchase
Ottimo supporto per Fuoribordo in teak
Very nice aesthetically and of excellent quality. Found only on SVB Marinw. Thanks again also the expeditiousness of the expedition.
Ekkehart P.
by Ekkehart P. Flag of Germany 9/11/2018 Verified purchase
Gutes Teak
Have this bracket for 10 years on the boat. It will only be replaced now because another boat destroyed it when moored.
Lars B.
by Lars B. Flag of Germany 8/3/2015 Verified purchase
Good woodwork, screws interfere somewhat with the motor mounting
Turan N.
by Turan N. Flag of Germany 6/19/2015 Verified purchase
VERY GOOD MATERIAL AND PROCESSING
Pierre B.
by Pierre B. Flag of France 6/11/2015 Verified purchase
In line with expectations. There are even plastic adapters to fit the diameter of the tubes of the balcony.
Michael H.
by Michael H. Flag of Germany 8/19/2014 Verified purchase
Prima, fulfills its purpose very well.
Brigitte J.
by Brigitte J. Flag of Germany 6/15/2014 Verified purchase
Was quickly assembled, solid product
Anonymous
by Anonymous 5/28/2013 Verified purchase
Everything okay - thank you!
Anonymous
by Anonymous 6/21/2012
Very good material, cutouts can also be used for heavy railing (diameter 29mm), insertable sleeves for reducing the diameter are included.
Alexandre G.
by Alexandre G. Flag of Portugal 8/27/2021 Verified purchase
It is a good product but only works if in pushpit with 90º angle, mine has a slight inclination and I had to cut a bit on the inside hole.
HRVOJE P.
by HRVOJE P. Flag of Slovenia 5/14/2019 Verified purchase
dimensions on the limit for broad spectrum of outboards
Malte W.
by Malte W. Flag of Germany 7/11/2022 Verified purchase
Quite expensive for just a piece of wood but does it's job!
Uwe W.
by Uwe W. Flag of Switzerland 7/22/2021 Verified purchase
Massive Teak AB Halterung
Makes a good impression. Unfortunately it is relatively small. It would be ideal if the bracket were longer and also had a mount for the lower pushpit strut. An additional cross brace has to be installed, which is not included in the scope of delivery.
Stéphane C.
by Stéphane C. Flag of France 4/5/2021 Verified purchase
For a Mercury 3.5 hp, the screws are badly placed, we have to shift it to the right or to the left to tighten it, too bad.
Corrado P.
by Corrado P. Flag of Italy 7/10/2019 Verified purchase
Supporto
Ottimo, facile da montare
Gunther S.
by Gunther S. Flag of Germany 3/20/2017 Verified purchase
The bracket is ok and fits