The Acqua Signal LED serie 43 resulted of very high quality. I have measured the angle for red and green Sector: exactly 112°50, as specified! Moreover, the separation between the two sectors is sharp, with almost no overlap. At the dark edges, also, the separation between light and dark - on both sides- was almost perfect. An excellent optical system! Very satisfying!
It is an excellent product that can easily be replaced by the old equivalent series of aqua signal with the traditional light bulb. One observation that the LEDs can not be replaced in the event of a fault, but will have to buy back the whole lamp at a considerable cost.
The cable guide is not at all the older models of the series 40. The instructions according to the installation instructions are even impractical, since it would not be possible to install it (it lacks a cable loop for mounting the connector). Have improvised and finally got everything mounted - now it shines and hopefully brings the hoped-for ampere-saving.
The cable guide is not at all the older models of the series 40. The instructions according to the installation instructions are even impractical, since it would not be possible to install it (it lacks a cable loop for mounting the connector). Have improvised and finally got everything mounted - now it shines and hopefully brings the hoped-for ampere-saving.
The cable guide is not at all the older models of the series 40. The instructions according to the installation instructions are even impractical, since it would not be possible to install it (it lacks a cable loop for mounting the connector). Have improvised and finally got everything mounted - now it shines and hopefully brings the hoped-for ampere-saving.