Hab zwar kein Boot - kaufe aber gerne wieder - super schnell und gibt es sonst nirgends.
Quality product. Not often - as a niche product it is unfortunately not cheap either. For the price I would have liked connecting nipples for all possibilities. Then I would have given 5 stars everywhere.
Item as a replacement for the initial filling of a water tank. Previous version still with cork seal (prone to mold), now better with rubber seal and angle bracket. I inserted a water level meter from Votronic into this plate, and it fits perfectly into the recess provided for it after drilling a 37mm hole. I can recommend this item - especially in the further developed version - without reservation, but I would not use the fuel gauge offered by the manufacturer again.
Although the reading of the mechanical fuel gauge is rather difficult to read, it is at least a level indicator. In otherwise opaque tanks so better than no level indicator.
Good quality flange plate. All necessary connections (elbow with two rubber seals for inlet, connection for water pump, venting nipple and a blind plug) are already included. Thanks to the flexible mounting options, installation is possible even under difficult spatial conditions. To top grade missing the delivery of the screws to attach the flange plate to the tank. But: definitely recommended !!
This number is a fuel gauge at a price of 1495. This is only available in one size and does not fit into the tank. Elsewhere there is the indicator in different sizes corresponding to the tank.
practical KIT, however, I would have expected all the necessary parts for a KIT. The screws for fastening and some tank fittings for overflow and ventilation are not included. Should be mentioned in the item description and above all specify the thread sizes.
the float of the gauge is a plug of cork ..... effective perhaps but very well sold I bought a tank of 33 liters .... and the gauge sold so saying for this tank 1- the gauge is too big for the tank, it can not stand upright and indicate when the tank is empty. so you have to reduce the height or fold or cut the gauge so it's pretty rough 2 - the holes in the gauge do not match those drill on the tank support ..... you need to get a drill to remake holes to shift from those originally planned .... so it's feasible but it takes time and needs to be a little handyman ...