ONE UP replaces PRE KOTE and YACHT PRIMER whilst still delivering the same levels of adhesion and protection.
ONE UP is a one-component primer and undercoat - two products in one. Easy to apply by brush and roller, ONE UP provides and extra smooth finish. As a primer, it delivers impressive adhesion and protection. Can be painted over with any 1-component paint. Suitable for substrates made of wood, steel, aluminium, zinc and GRP. Yield: 10 m²/litre. Suitable thinner: No. 1. For easier application, can be thinned up to 10 % as desired.
In good condition: Wash down with a suitable detergent, rinse with fresh water and allow to dry. Abrade with 220280 grade (grit) paper.
In poor condition: Remove all previous coatings.
Bare wood: Sand smooth with 80180 grade paper. Remove sanding dust by brushing, dusting and wiping. Allow to dry completely before applying further products.
Steel: Degrease with solvent or Super Cleaner. Gritblast to Sa 2½ near white metal surface. If gritblasting is not possible, grind the metal surface with 2436 grit abrasive discs to a uniform, clean, bright well roughened metal surface 5075microns anchor pattern. Use angle grinder on small areas. Clean thoroughly and allow to dry.
Aluminium: : Degrease with solvent or Super Cleaner. Sand well using 24120 grade (aluminium compatible) paper. Clean thoroughly.
Zink: : Degrease with solvent or Super Cleaner. Sand well using 60120 grade (aluminium compatible) paper. Clean thoroughly.
GRP: : Degrease with solvent or Super Cleaner. Sand well using 180220 grade (aluminium compatible) paper. Clean thoroughly.
Steel and aluminium: Apply 3 coats of the primer (unthinned).
GRP: Apply 2 coats (unthinned(.
Wood: Apply 4 coats (unthinned).
Drying time at 15° C: 3 hrs
Overcoating time at 15° C: at least 18 hours
Processing temperature: +5 °C to max. 35° C
Please note the following hazard warnings:
Customers ask customers
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: email@example.com or by phone on: +49 (0)421 57290510 .