INTERNATIONAL TOPLAC PLUS High Gloss One-Component Boat Paint
SVB recommends the following for these items
Product details
Dilute 0-10% for easier processing. Above 25° C, add an additional 5% thinner.
Processing instructions:
For coated surfaces:
- In good condition: Wash down with a suitable detergent, rinse with fresh water and allow to dry. Then sand the surface.
- In poor condition: Remove all previous coatings and prime the surface.
Technical data
- Processing temperature: +5 °C to max. 35 °C
- Drying time at 15 °C: 3 hours
- Processing time at 15 °C: min. 16 hours
GRP
Degrease with thinner No.100 or Super Cleaner. Thoroughly sand with 180-220 grit sandpaper. Clean well and allow to dry. Prime the surface with a suitable primer, such as One Up. Then apply 2-3 coats of Toplac Plus.
Weathered gelcoat
Due to increased porousness, the risk of solvent/moisture entrapment is increased, leading to potential blistering. To counter this risk, 3 coats of Interprotect must be applied to seal. When using Interprotect, Perfection undercoat must be applied before using the topcoat.
Wood / Plywood
Sand smooth with 80180 grade paper. Remove sanding dust by brushing, dusting and wiping. Allow to dry completely before applying further products. Prime the surface with a suitable primer, such as One Up. Then apply 2-3 coats of Toplac Plus.
Steel
Degrease with thinner No.100 or Super Cleaner. Gritblast to near white metal surface (Sa 2½). If gritblasting is not possible, grind the metal surface with 36-40 abrasive discs to a uniform, clean, bright well roughened metal surface (5075microns) anchor pattern. Use angle grinder on small areas. Clean thoroughly and allow to dry. Prime the surface with a suitable primer, such as One Up. Then apply 2-3 coats of Toplac Plus.
Aluminium
Degrease with thinner No.100 or Super Cleaner. Thoroughly sand with 60-120 grit sandpaper (suitable for aluminum). Clean well and allow to dry. Prime as soon as possible (within 8 hours) with One UP. Then apply 2-3 coats of Toplac Plus.
Product safety
Please note the following hazard warnings:
May cause drowsiness or dizziness.
Harmful to aquatic life with long lasting effects.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Read label before use.
Wear protective gloves/protective clothing/eye protection/face protection.
Use only outdoors or in a well-ventilated area.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Keep cool.
Dispose of contents/container to …
Avoid release to the environment.
Use personal protective equipment as required.
Obtain special instructions before use.
Documents
Item no.: 41446
Item no.: 41437,41436,41435
Item no.: 41443
Accessories
Similar items
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .