SVB price: 26,85 € (35,80 € / l )
You save: 41%
45,42 €
Excl. VAT, excl. shipping costs.
This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
more than 100 in stock
pcs.
Item no.
40684
EAN
5035686115729
Model no.
YJB000/750AR
Description
INTERNATIONAL - INTERDECK
Colour
White
Contents
750 ml
Yield (theoretical)
8.4 m²
Finish
Silk gloss
No. of components
1 component
Method of application
Roller, Brush
No. of coats (recommended)
1 - 2
For substrate
GRP, Wood, Steel, Aluminium

Product details

INTERDECK is an excellent, non-slip one-component deck coating. Tough polyurethane resins protect the deck against everyday wear and tear. Yield: 11.2 m²/litre. Thinner no.1.
Application instructions:

For coated surfaces:
  • In good condition: Wash down with a suitable detergent, rinse with fresh water and allow to dry. Abrade with 280­320 grade (grit) paper.
  • In poor condition: Remove all previous coatings and prime the surface.

All surfaces: Sand primer with 180-220 grit. Afterwards, remove dust residues from the surface and apply 1-2 coats of Interdeck.

Bare wood: Abrade with 80-180 grit sandpaper. Then with 280 grit paper. Remove sanding dust by brushing, dusting and wiping. Allow to dry completely.

Aluminium: : Degrease with solvent or Super Cleaner. Sand well using 24­120 grade (aluminium compatible) paper. Clean thoroughly and allow to dry. Prime with One UP as soon as possible (within 8 hours).

Steel: Degrease with solvent or Super Cleaner.Gritblast to Sa 2½ ­ near white metal surface. If gritblasting is not possible, grind the metal surface with 24­36 grit abrasive discs to a uniform, clean, bright well roughened metal surface (50­75­microns) anchor pattern. Use angle grinder on small areas. Clean thoroughly and allow to dry and then apply primer.

GRP: Degrease with solvent or Super Cleaner. Sand well using 180­220 grade paper. Clean thoroughly and allow to dry and apply primer.

Old / weathered gelcoat:Degrease with thinner or Super Cleaner. Thoroughly sand with 180-220 grit sandpaper. Clean well and allow to dry. To prevent blistering, apply 3 coats of a 2-component primer, then overcoat with a 2-component undercoat.


Drying time at 15 °C: 4 hours
Processing time at 15 °C: min. 20 hours
Processing temperature: +5 °C to max. 35 °C

Product safety

Please note the following hazard warnings:

Hazard pictograms
Signal word
Warning
Hazard warnings
Flammable liquid and vapour.
May cause damage to organs through prolonged or repeated exposure.
May cause drowsiness or dizziness.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Read label before use.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep cool.
Do not breathe dust/fume/gas/mist/vapours/spray.
Wear protective gloves/protective clothing/eye protection/face protection.
Get medical advice/attention if you feel unwell.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Dispose of contents/container to …
H226, H373, H336, P101, P102, P103, P210, P235, P260, P280, P314, P303+P361+P353, P501

Documents

en-flag Datasheet
PDF, 194,26 KB
en-flag Manual
PDF, 5,86 MB
de-flag Datasheet
PDF, 523,13 KB
de-flag Datasheet
PDF, 200,32 KB
de-flag Manual
PDF, 3,12 MB
de-flag Safety datasheet
PDF, 188,33 KB
es-flag Datasheet
PDF, 194,55 KB
es-flag Manual
PDF, 5,66 MB
it-flag Datasheet
PDF, 190,32 KB
it-flag Manual
PDF, 2,89 MB
fr-flag Manual
PDF, 6,08 MB
multi-flag Manual
PDF, 4,48 MB

What other SVB customers have to say

100% real reviews

140 customer reviews

4.5 (out of 140 ratings)
100% recommend SVB
  • Advantages
  • Colour (3)
  • Yield (theoretical) (2)
  • Processing (3)
  • Flow properties (3)
  • Covering power (3)
  • Price/performance ratio (2)
Karsten G.
by Karsten G. Flag of Danimarca 28/04/2022 Verified purchase Variant: 40687
Cheap product and fast delivery
Georges G.
by Georges G. Flag of Francia 20/05/2021 Verified purchase Variant: 40684
Interdeck
easy to apply
Robert P.
by Robert P. Flag of Belgio 06/06/2018 Verified purchase Variant: 40842
Merci pour le service ,le produit et le soin pour l'emballage
View all ratings

Rate product

How would you rate this product?
Disappointed
Completely fails to meet my expectations
Poor
Only some expectations are met
OK
Meets my basic expectations
Good
Slightly better than my general expectations
Excellent
Fully exceeds my expectations
Click on the stars to rate

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .

  • More "Customers ask customers" available in the following languages :
  • Flag of Deutsch
  • Flag of Français
  • Flag of Español

Technical question

Question:
User image of Igor Š.
Igor Š. asked
on 22 mar 2024
Flag of English Dear Sirs Please let me know, if i can apply Interdeck ( International ) over OneUp or i have to apply after Toplack. Best regards Igor
No answers yet. Be the first to answer this question!