SIMARINE SIMARINE PICO + System Monitor / surface mount, black
SIMARINE SIMARINE PICO + System Monitor / surface mount, silver
The SIMARINE PICO+ is a high-quality system monitor to which all active SIMARINE shunts and/or measuring modules can be added as required and can then measure up to 6 battery banks (lead/acid, GEL, AGM or LiFePO4), 6 additional battery voltages, 14 tank levels...
SVB recommends the following for this item
Product details
With the respective shunts/measuring modules it can monitor up to 6 battery banks (lead/acid, GEL, AGM or LiFePO4, 12 or 24 V), 6 additional battery voltages, 14 tank levels and 20 consumer or generator currents and has extensive alarm functions.
The SIMARINE app (iOS/Android) displays all measured values on your smartphone and is useful for convenient programming of basic settings. PICO+ can, of course, also be operated via 4 touch keys on the display itself.
Innovative SIMARINE BUS technology makes installation child's play. Simply connect PICO+ to a small data splitter via a thin cable. The splitter is connected to a 12 or 24 V DC and provides the display with operating voltage. Shunts & measurement modules are connected to the splitter via 5 m long data lines (supplied with the shunt/measurement module), but can also be connected from shunt/measurement module to shunt/measurement module. An extension cable is optionally available.
The waterproof housing (IP67) can be mounted on any flat surface. It is fastened at the rear using four M3 threaded bolts and knurled nuts. Dimensions: 97.5 x 83 x 10 mm, colour: matt black. Delivery includes: display, data splitter box, mounting material.
Example of use
The ST107 module alone can be used to provide a very precise display for several tanks. The module contains 4 resistance measuring inputs (0-65 kOhm), suitable for almost all common tank sensors (10-180 Ohm, 240-33 Ohm, 0-190 Ohm, etc.) as well as 3 voltage measuring inputs e.g. for the BEPMARINE TS1 ultrasonic tank sensor (this must be programmed to 0-5 V output signal). With up to 11 programmable calibration points, the levels of asymmetrically shaped tanks can be displayed very precisely, which is not possible with the usual tank displays.
PICO + is delivered without shunts or measuring modules.
You can choose here the correct shunts, measuring modules and other accessories for your needs.
Shunts, measuring modules and accessories
Type | Range of functions | Manufacturer # | SVB Item # |
SC303 | 300 A shunt, detects 2x voltage, (battery) 3x resistance (of which 1x battery temperature sensor), DC cable, temp. sensor, 5 m SIMARINE data cable and mounting material included. | S001 | 25502 |
SC503 |
500 A shunt, detects 2x voltage, (battery) 3x resistance (of which 1x battery temperature sensor), DC cable, temp. sensor, 5 m SIMARINE data cable and mounting material included. | S002 | 24412 |
SC302T | 300 A shunt, additionally measures 2x voltage (including 1x for battery), 2x resistor measurement (including 1x for battery temperature sensor) | S005 | 24411 |
SC502T | 500 A shunt, additionally measures 2x voltage (including 1x for battery), 2x resistor measurement (including 1x for battery temperature sensor) | S006 | 25503 |
ST107 | Tank & temperature measuring module, measures 3x voltage (eg for tank sensors with DC output signal such as BEPMARINE TS1, 4x resistor (for tank or temperature sensors), 1x neutral alarm changeover contact (loadable max 1 A, 30 V) | T001 | 24413 |
SCQ25 | Active 4-way 25 A shunt (individual shunts can be connected in parallel and the measured values can be added or subtracted via the software), 1x neutral alarm changeover contact (maximum load 1 A, 30 V) | S003 | 24414 |
SCQ25T | Active 4-way 25 A shunt (individual shunts can be connected in parallel and the measured values can be added or subtracted via the software), additionally measures 3x voltage (eg for tank sensors with DC output signal such as BEPMARINE TS1, 4x resistance (for tank or temperature sensors) , 1x neutral alarm changeover contact (maximum load 1 A, 30 V) | S004 | 24415 |
TS01 | NTC temperature sensor 10 k, 1%, waterproof, cable length 1 m | TS01 | 24381 |
TS02 | NTC temperature sensor 10 k, 1%, waterproof, cable length 5 m | TS02 | 24382 |
DC02 | Data cable extension 8 m, incl. RJ10 connector (socket / socket) | DC02 | 24383 |
SKU | Elastic cover for PICO body, blue | C001 | 25504 |
SKU | Elastic cover for PICO body, black | C002 | 25505 |
Acoustic & optical signaling devices for shunts / measuring modules with alarm contact | |||
Acoustic alarm, surface mounting, 12 V DC | 23403 | ||
Acoustic alarm, surface mounting, 12/24 V DC | 27864 | ||
Acoustic alarm, flush-mounted, 12 V DC | 24113 | ||
Acoustic alarm, flush-mounted, 24 V DC | 24127 | ||
Control lamp red, flush mounting, 12 V DC | 46704 | ||
Control LED red, chrome-plated, flush-mounted, 12 V DC | 24323 | ||
Control LED yellow, chrome-plated, flush-mounted, 12 V DC | 24324 | ||
Control LED green, chrome-plated, flush-mounted, 12 V DC | 24322 | ||
Control LED blue, chrome-plated, flush-mounted, 12 V DC | 24325 | ||
Control LED red, chrome-plated, flush-mounted, 12/24 V DC | 46049 |
Please note
- The PICO + can not be used as a second display (2nd control station) for an existing SIMARINE-PICO system monitor.
- PICO+ includes a barometer. There is a small opening / diaphragm on the back of the housing. In order for the barometer to work properly, a corresponding hole must also be made in the mounting surface to match this opening.
Documents
Accessories
Customers also bought
Similar items
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .