EPIFANES COPPER CRUISE Self Polishing Antifouling
Item no.
53880
EAN
8715559855040
Model no.
E6-40A
Description
EPIFANES - COPPER-CRUISE
Antifouling type
Self-polishing antifouling
Colour code
Black
Area of application
Salt water, Fresh water, Brackish water / Mixed operation
Hull material
GRP, Wood, Steel
Method of application
Roller, Brush
Yield (theoretical)
7
m²
BAuA-No.
N-74891
Boat type
Sailboat, Motorboat
Biocide-free
No
Immersion after
24
h @ 15 °C
Max. time before immersion
1 month
No. of coats (recommended)
2 - 3
Existing coating
SEATEC Standard Pro, INTERNATIONAL Cruiser 200, INTERNATIONAL Cruiser 250, INTERNATIONAL Micron 300, INTERNATIONAL Micron 350, HEMPEL Classic, HEMPEL Mille NCT, HEMPEL Ecopower Cruise, AWN Selbstpolierendes Antifouling, EPIFANES Copper-Cruise
For the Netherlands
Yes
SVB recommends the following for these items
Product details
Copper Cruise antifouling from Epifanes contains copper and biocide and is suitable for a variety of uses, guaranteeing effective, long-term protection against fouling. Copper Cruise is especially suitable for fresh and saltwater areas and has been specially manufactured for steel, wood and GRP boats with a maximum speed of 50 km/h (30 knots). Not suitable for aluminium boats.
Apply the antifouling in its undiluted state and make sure to stir the paint thoroughly before applying. Can be painted over again after 6 hours (at 18°C.) Boat can be put back into water after at least 24 hours upon application (at 18°C) and no longer than one month thereafter. Yield: approx: 7-8 m² with an amount of 750 ml. Available in different versions.
Processing instructions
Technische Daten
Application
For uncoated surfaces: Remove salts, detergents, contaminants and marine growth using a high-pressure cleaner. Primer the substrate with Underwater Primer CR (1 component) or with Epifanes Epoxy System + Interimcoat (2 components).
For coated surfaces: Clean thoroughly with fresh water to remove fouling and salt. Bad quality antifouling should be completely removed. Surface must be clean, dry and grease free.
Use on GFRP, wood and steel: Apply two coats (more heavily contaminated areas such as; waterline, rudder etc. three coats).
Do not apply to aluminium or substrates containing Teflon.
Note
Epifanes COPPER-CRUISE CTGB is authorised for use in the Netherlands with the approval number 14301. Only the German approval number is printed on the German tins. However, the product is approved in the Netherlands!
Apply the antifouling in its undiluted state and make sure to stir the paint thoroughly before applying. Can be painted over again after 6 hours (at 18°C.) Boat can be put back into water after at least 24 hours upon application (at 18°C) and no longer than one month thereafter. Yield: approx: 7-8 m² with an amount of 750 ml. Available in different versions.
Processing instructions
Technische Daten
- Processing temperature: temperature of the substrate at least +10 °C.
- Drying time at 20 °C: 30 minutes (dust-dry) / 1 hour (tack-free)
- Overcoating time at 20 °C: 6 - 8 hours.
Application
For uncoated surfaces: Remove salts, detergents, contaminants and marine growth using a high-pressure cleaner. Primer the substrate with Underwater Primer CR (1 component) or with Epifanes Epoxy System + Interimcoat (2 components).
For coated surfaces: Clean thoroughly with fresh water to remove fouling and salt. Bad quality antifouling should be completely removed. Surface must be clean, dry and grease free.
- Soft antifoulingRemove by rough sanding
- Hard antifouling: Degrease with suitable degreaser, sand with P60 and degrease again.
- Self-polishing antifouling: Remove loose antifouling residues with a high-pressure cleaner.
Use on GFRP, wood and steel: Apply two coats (more heavily contaminated areas such as; waterline, rudder etc. three coats).
Do not apply to aluminium or substrates containing Teflon.
Note
Epifanes COPPER-CRUISE CTGB is authorised for use in the Netherlands with the approval number 14301. Only the German approval number is printed on the German tins. However, the product is approved in the Netherlands!
Product safety
Please note the following hazard warnings:
Hazard pictograms
Signal word
Warning
Hazard warnings
Flammable liquid and vapour.
Causes skin irritation.
May cause an allergic skin reaction.
Causes serious eye irritation.
May cause respiratory irritation.
May cause damage to organs through prolonged or repeated exposure.
Very toxic to aquatic life with long lasting effects.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Read label before use.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Use only outdoors or in a well-ventilated area.
Wear protective gloves/protective clothing/eye protection/face protection.
In case of fire: Use … for extinction.
Store locked up.
Dispose of contents/container to …
Causes skin irritation.
May cause an allergic skin reaction.
Causes serious eye irritation.
May cause respiratory irritation.
May cause damage to organs through prolonged or repeated exposure.
Very toxic to aquatic life with long lasting effects.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Read label before use.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Use only outdoors or in a well-ventilated area.
Wear protective gloves/protective clothing/eye protection/face protection.
In case of fire: Use … for extinction.
Store locked up.
Dispose of contents/container to …
H226, H315, H317, H319, H335, H373, H410, P101, P102, P103, P210, P271, P280, P370+P378, P405, P501
Documents
Datasheet
PDF, 337,22 KB
Safety datasheet
PDF, 424,49 KB
Accessories
YACHTCARE
Dust Cloth
only
€3
78
> 100
EPIFANES
CR One-Component Underwater Primer
from
€31
05
2 variants
EPIFANES
Thinner D-100 for Antifouling
only
€17
61
1
3M
Premium Respirator Mask
only
€7
52
33
3M
Safety Goggles
only
€11
72
26
3M
Protective Overall
from
€13
40
4 variants
3M
Masking Tape TOP TAPE 18 mm or 24 mm x 50 m
from
€2
48
2 variants
Antifouling Flat Brush
from
€2
10
3 variants
Paint Set / Roller, Handle and Tray
only
€2
61
> 100
Customers also bought
-7%
SIKA
Sikaflex - 295 UV Marine Adhesive / Sealant
23,50 €
from
€21
81
2 variants
EPIFANES
One-Component Clear High-Gloss Boat Varnish for Wood
from
€18
45
3 variants
-11%
SIKA
Sikaflex - 292i Marine Structural Adhesive
18,90 €
only
€16
76
> 100
VELCRO
Velcro Cable Tie
from
€2
77
2 variants
SPRENGER
Cover Frame
only
€14
24
35
Wood Thru-Hull Plugs / Ø 10-40 mm
only
€6
68
> 100
-10%
YACHTCARE
LEAK HERO Sealant / 625 ml
33,45 €
only
€30
21
> 100
EPIFANES
CR One-Component Underwater Primer
from
€31
05
2 variants
-30%
SHAKESPEARE
SQUATTY BODY VHF Marine Radio Antenna
71,60 €
only
€50
38
48
Similar items
NEW
SEAJET
EMPEROR A 034 Self-polishing Antifouling
54,58 €
from
€46
18
10 variants
NEW
SEAJET
SHOGUN 033 Self-Polishing Antifouling
53,74 €
from
€44
50
10 variants
NEW
SEAJET
SAMURAI 031 Self-polishing Antifouling
36,09 €
from
€32
73
8 variants
-50%
INTERNATIONAL
MICRON 300 Self-Polishing Antifouling
279,23 €
only
€138
61
24
HEMPEL
ECOPOWER CRUISE Self-Polishing Antifouling
from
€25
17
2 variants
HEMPEL
CLASSIC Self-Polishing Antifouling
from
€20
13
6 variants
-26%
SEATEC
STANDARD PRO Self-Polishing Antifouling
28,53 €
from
€20
97
8 variants
-44%
INTERNATIONAL
CRUISER 250 Self-Polishing Antifouling
67,68 €
from
€37
77
10 variants
-42%
INTERNATIONAL
CRUISER 200 Self-Polishing Antifouling
67,78 €
from
€39
45
10 variants
-46%
INTERNATIONAL
MICRON 350 Self-Polishing Antifouling
93,91 €
from
€50
38
11 variants
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
No questions asked yet. Be the first to ask a question!