SEATEC STANDARD PRO Self-Polishing Antifouling
Article Number
66667
EAN
5035686881792
Model no.
66667
Description
SEATEC - Antifouling STANDARD PRO
Antifouling type
Self-polishing antifouling
Colour code
Red brown
Area of application
Salt water, Fresh water, Brackish water / Mixed operation
Hull material
GRP, Wood, Steel
Method of application
Roller, Brush, Spray gun
No. of coats (recommended)
2 - 3
Yield (theoretical)
7.5
m²
Immersion after
6
h @ 15 °C
Max. time before immersion
6 months
Biocide-free
No
For the Netherlands
No
Boat type
Sailboat, Motorboat
Existing coating
SEATEC Standard Pro, INTERNATIONAL Cruiser 200, INTERNATIONAL Cruiser 250, INTERNATIONAL Micron 300, INTERNATIONAL Micron 350, HEMPEL Classic, HEMPEL Mille NCT, HEMPEL Ecopower Cruise, AWN Selbstpolierendes Antifouling, EPIFANES Copper-Cruise
BAuA-No.
N-74279
SVB recommends the following for these items
Product details
A further development of STANDARD, the proven SEATEC Antifouling. STANDARD PRO is a universal, self-polishing antifouling for sailing yachts, dinghies and motor yachts, based on bioactive, organic and copper compounds. Due to the self-polishing effect, there is always an active layer on the surface and thick layers don't accumulate over the years. An additional coat of the same quality can be applied directly onto the existing antifouling. Thinner: Antifouling Thinner. Yield: 10 m²/l. Recommendation: For use in the Mediterranean, we recommend our Seatec SPRINT PRO.
Processing instructions
Older self-polishing antifoulings can be painted over without issue after thorough cleaning. A special primer is not necessary in this case.
For coated surfaces
- In good condition: Remove fouling, impurities and paint residues completely and then sand wet with 80-120 grit sandpaper (not dry!). If existing antifouling is not compatible or unknown, seal with suitable barrier coat.
- In poor condition: Remove all antifouling residues.
GRP/Blank gelcoat: Make sure the surface is clean, dry, dust-free and in a generally good condition. Then prime the surface with Plasmotec or with Epotec (osmosis protection). Then apply two coats of STANDARD PRO.
Steel/lead and wood: Make sure the surface is clean, dry, dust-free and in a generally good condition. Then prime the surface with Plasmotec or with Epotec to protect the hull from corrosion. Then apply two coats of STANDARD PRO.
Not suitable for application on aluminium or older PTFE antifoulings!
Drying time | ||||
Temperature | 5° C / 41° F | 15° C / 59° F | 23° C / 73° F | 35° C / 95° F |
Hand dry after | 60 minutes | 45 minutes | 30 minutes | 20 minutes |
Launch after | 8 hours | 6 hours | 4 hours | 4 hours |
Overcoat interval | |
Temperature | Time |
5° C / 41° F | 16 hours |
15° C / 59° F | 10 hours |
23° C / 73° F | 6 hours |
35° C / 95° F | 4 hours |
These antifoulings / paints may not be used in Holland.
Use biocidal products with care. Always read the label and product information prior to use.
Product safety
Please note the following hazard warnings:
Hazard pictograms
Signal word
Warning
Hazard warnings
May cause an allergic skin reaction.
May cause respiratory irritation.
Very toxic to aquatic life with long lasting effects.
Flammable liquid and vapour.
Causes serious eye damage.
Immediately call a POISON CENTER or doctor/physician.
IF IN EYES:
Dispose of contents/container to …
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Take off contaminated clothing and wash before reuse.
IF ON SKIN:
In case of inadequate ventilation wear respiratory protection.
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid release to the environment.
Use only outdoors or in a well-ventilated area.
Keep cool.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Read label before use.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
May cause respiratory irritation.
Very toxic to aquatic life with long lasting effects.
Flammable liquid and vapour.
Causes serious eye damage.
Immediately call a POISON CENTER or doctor/physician.
IF IN EYES:
Dispose of contents/container to …
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Take off contaminated clothing and wash before reuse.
IF ON SKIN:
In case of inadequate ventilation wear respiratory protection.
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid release to the environment.
Use only outdoors or in a well-ventilated area.
Keep cool.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Read label before use.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
H317, H335, H410, H226, H318, P310, P305, P501, P304+P340, P303+P361+P353, P362, P302, P285, P280, P273, P271, P235, P210, P103, P102, P101
Documents
Datasheet
PDF, 128,72 KB
Safety datasheet
PDF, 184,21 KB
Safety datasheet
PDF, 187,14 KB
Safety datasheet
PDF, 186,88 KB
Safety datasheet
PDF, 182,72 KB
Accessories
-23%
SEATEC
EPOTEC Epoxy Primer
29,37 €
from
€22
65
2 variants
-24%
SEATEC
PLASMOTEC One-Component Underwater Primer
20,97 €
from
€15
92
2 variants
YACHTCARE
Dust Cloth
only
€3
78
78
3M
Premium Respirator Mask
only
€7
52
> 100
3M
Safety Goggles
only
€11
72
51
3M
Protective Overall
from
€13
40
4 variants
3M
Masking Tape TOP TAPE 18 mm or 24 mm x 50 m
from
€2
48
2 variants
Antifouling Flat Brush
from
€2
10
3 variants
Paint Set / Roller, Handle and Tray
only
€2
61
> 100
-27%
SEATEC
Antifouling Thinner
18,45 €
only
€13
40
> 100
Customers also bought
SIKA
Sikaflex - 291i Marine Sealant / Filler
from
€7
14
6 variants
-35%
INTERNATIONAL
PRIMOCON One-Component Primer and Barrier
37,25 €
from
€24
33
2 variants
3M
Masking Tape TOP TAPE 18 mm or 24 mm x 50 m
from
€2
48
2 variants
Paint Set / Roller, Handle and Tray
only
€2
61
> 100
-27%
SEATEC
Antifouling Thinner
18,45 €
only
€13
40
> 100
-22%
SEATEC
Epoxy Putty
26,85 €
from
€20
97
2 variants
-24%
SEATEC
PLASMOTEC One-Component Underwater Primer
20,97 €
from
€15
92
2 variants
Similar items
NEW
SEAJET
EMPEROR A 034 Self-polishing Antifouling
54,58 €
from
€46
18
10 variants
NEW
SEAJET
SHOGUN 033 Self-Polishing Antifouling
53,74 €
from
€44
50
10 variants
NEW
SEAJET
SAMURAI 031 Self-polishing Antifouling
36,09 €
from
€32
73
8 variants
-7%
EPIFANES
COPPER CRUISE Self Polishing Antifouling
51,70 €
from
€47
86
10 variants
-50%
INTERNATIONAL
MICRON 300 Self-Polishing Antifouling
279,23 €
only
€138
61
14
HEMPEL
ECOPOWER CRUISE Self-Polishing Antifouling
only
€25
17
3
HEMPEL
CLASSIC Self-Polishing Antifouling
from
€20
13
6 variants
-44%
INTERNATIONAL
CRUISER 250 Self-Polishing Antifouling
67,68 €
from
€37
77
10 variants
-42%
INTERNATIONAL
CRUISER 200 Self-Polishing Antifouling
67,78 €
from
€39
45
10 variants
-46%
INTERNATIONAL
MICRON 350 Self-Polishing Antifouling
93,91 €
from
€50
38
11 variants
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
Technical question
Question:
Olli V.
asked
on 13 oct 2018
Hello!
I am very satisfied with this antifouling. Is it possible that you ask the factory make colour dark grey. I think that may be very polular because very often new boats has that colour waterline or hole hull.
Best regards
Olli
Answer:
Hi Olli, I used black color and I´ll think, it´s as good as dark grey. At least in my boat with white hull, black antifoulding looks great.
Question:
Heikki L.
asked
on 1 nov 2018
Hi!
- Do you ship this product to Finland?
- What is the minimum temperature for using this paint?
- Do you user guide(in english) for this product?
Answers:
Kyllä ovat toimittaneet kotiovelle tänäkin keväänä ja edullisesti (8,90 eur) .Varmaankin samat lämpötilat kuin suomessa myytävillä antifoulingeilla,olen käyttänyt Seatecia jo 3 vuotta ainakin ja hyvin on toiminut.Käyttöohjeet löytyvät enlanniksi muistaakseni samoilta sivuilta kuin maalikin.
Ihan hyvä tuote, ehkä parempi kuin monet kalliimmat. Olen ohentanut ja tulos on ollut hyvä. Ymmärtääkseni normaali maalauslämpötila eli ei pakkanen.
Super maali.Olen käyttänyt useamman sesongin.+10C minimi.
Syksyllä kevyt painepesu ja puhdas näkitön pinta.
Question:
Kari S.
asked
on 8 may 2020
Hi
Seatec self polishing antifouling on old Micron Extra, any experiences?
Kari Suosalmi
karisuo@posti24.fi
Answers:
It is a grate produkt I have used it on the swedish westcost and it have kept the bottom clean
I have used, works well. The oldone must be clean ofcourse.
Thanks
The old Micron is still working, but needs some more cover after all these years.
I will try Seatec.
I had Hempel before and it was replaced by Seatec years ago , and old paint was mixed with app. 30 % thinner so i had to remove all the dust before repainting it works fine .