Zinc Primer Spray / 400 ml
Article Number
30424
EAN
8033137008511
Description
Zinc primer spray
No. of components
1 component
Area of application
Below water
For substrate
Steel, Aluminium
Method of application
Spray can
Osmosis prevention
No
Overcoating intervals
See data sheet
Colour
Transparent
Contents
400
ml
Yield (theoretical)
1.1
m²
SVB recommends the following for this item
Product details
Effective, acrylic-based zinc primer for propellers and engines in a practical spray can. This zinc barrier layer can also be applied to hard-to-reach places using a spray bottle. The special spray head prevents the formation of drops. For use on all metals. Content: 400 ml.
Processing instructions:
Note! Always read the label and the product information before using. Shake well.
Processing instructions:
- Drying time at 20 °C: 5-10 min (dust dry)
- Overcoating time at 20 °C: 30-60 min.
- Launch: after 24 hrs.
Note! Always read the label and the product information before using. Shake well.
Product safety
Please note the following hazard warnings:
Hazard pictograms
Signal word
Warning
Hazard warnings
Causes serious eye irritation.
May cause drowsiness or dizziness.
Extremely flammable aerosol.
Pressurized container: may burst if heated.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Do not spray on an open flame or other ignition source.
Pressurized container: Do not pierce or burn, even after use.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Use only outdoors or in a well-ventilated area.
Wear protective gloves/protective clothing/eye protection/face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Protect from sunlight. Do no expose to temperatures exceeding 50°C/ 122°F.
May cause drowsiness or dizziness.
Extremely flammable aerosol.
Pressurized container: may burst if heated.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Do not spray on an open flame or other ignition source.
Pressurized container: Do not pierce or burn, even after use.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Use only outdoors or in a well-ventilated area.
Wear protective gloves/protective clothing/eye protection/face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Protect from sunlight. Do no expose to temperatures exceeding 50°C/ 122°F.
H319, H336, H222, H229, P101, P102, P210, P211, P251, P261, P271, P280, P305+P351+P338, P410+P412
Documents
Safety datasheet
PDF, 327,10 KB
Similar items
NEW
SEAJET
Multipurpose 2-Component Epoxy Primer Spray
€26.01
only
€24
33
10
NEW
SEAJET
Multipurpose 2-Component Epoxy Primer
€52.06
from
€44
50
4 variants
NEW
SEAJET
015 Underwater Primer Spray
only
€17
61
11
NEW
SEAJET
015 Underwater Primer
€33.57
from
€31
05
2 variants
NEW
INTERNATIONAL
B-FREE CONVERSION COAT 2-Component Primer
€45.00
from
€41
97
2 variants
NEW
INTERNATIONAL
B-FREE TIECOAT 2-Component Primer
from
€50
38
2 variants
HEMPEL
2-Component Conversion Primer
from
€41
13
2 variants
SPRENGER
PROP SPRAY 400 ml / grey
only
€16
76
> 100
-44%
BOERO
MISTRAL FONDO Primer
€34.32
from
€19
29
2 variants
HEMPEL
LIGHT PRIMER SPRAY 2-Part Epoxy Primer
only
€27
69
16
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
No questions asked yet. Be the first to ask a question!