Slow Hardener 206 and Epoxy Resin 105 / 6 kg

38 in stock
SVB price: €197.44 (€32.91 / kg )
Excl. VAT, excl. shipping costs.
This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
€197.44 This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
Available variants:
Item no.
Slow hardener 206 + epoxy resin 105 / B-Pack
6 kg
Mixing ratio
for substrate
Method of application
Roller, Brush, Filler
Pot life
30 min
Curing time
9 h @ 20 °C
Fully cured
9 Days
with pump
Order within next 7 hrs 11 min, ships today!

Product details

The slow hardener 206 is an epoxy hardener, which consists of a low viscosity mixture of polyamines. It can be mixed with the resin 105 in he ratio of 5 parts resin to 1 part hardener, the cured mixture yields a high strength, rigid, moisture-resistant body that is perfectly suited as a coating or adhesive and for wetting of glass fabric.

The hardener 206 is typically used for larger areas and bondings that take a longer time. Pot life at 21°C: 25 to 30 minutes. Cured at 21°C in about 9 hours into a solid mass, and reaches full cure in about nine days.

NOTE: Not available for sale in Switzerland!

Product safety

Please note the following hazard warnings:

Hazard pictograms
Signal word
Hazard warnings
Harmful to aquatic life with long lasting effects.
May cause an allergic skin reaction.
Causes severe skin burns and eye damage.
Wash … thoroughly after handling.
Store locked up.
Immediately call a POISON CENTER or doctor/physician.
Take off contaminated clothing and wash before reuse.
Contaminated work clothing should not be allowed out of the workplace.
Avoid breathing dust/fume/gas/mist/vapours/spray.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
If skin irritation or rash occurs: Get medical advice/attention.
IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
Gently wash with plenty of soap and water.
Rinse cautiously with water for several minutes.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Wear protective gloves/protective clothing/eye protection/face protection.
Keep out of reach of children.
Dispose of contents/container to …
Avoid release to the environment.
Remove contact lenses, if present and easy to do. Continue rinsing.
H412, H317, H314, P264, P405, P310, P362, P272, P261, P304+P340, P333+P313, P301+P330+P331, P350, P351, P303+P361+P353, P280, P102, P501, P273, P338


de-flag Manual
PDF, 4,11 MB
de-flag Safety datasheet
PDF, 359,09 KB

What other SVB customers have to say

100% real reviews
Peter J.
Flag of Germany Verified purchase
Super Abwicklung
Jederzeit wieder.
Daniel G.
Flag of France Verified purchase
Procèdé epoxy
Excellent produit adapté à mon utilisation
Carlo R.
Flag of Italy Verified purchase
excellent product but with a processing time that is too short which forces me to ask for help from capable and willing friends every time. \ r \ nI am forced to use it because it is foreseen by the construction plans and therefore demanded by the engineer in charge of surveillance.
View all ratings

Rate product

How would you rate this product?
Completely fails to meet my expectations
Only some expectations are met
Meets my basic expectations
Slightly better than my general expectations
Fully exceeds my expectations
Click on the stars to rate

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .

  • More "Customers ask customers" available in the following languages :
  • Flag of Deutsch
No questions asked yet. Be the first to ask a question!