WEST SYSTEM Slow Hardener 206 and Epoxy Resin 105 / 1.2 kg

Reset image position
Close
Back
Item no. 42377
20 in stock
pcs.
SVB price: €58.78 (€48.98 / kg )
Excl. VAT, excl. shipping costs.
This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
pcs.
€58.78 This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
Buy
Available variants:
Image of 206 Slow Hardener and 105 Epoxy Resin / 6 kg

WEST SYSTEM 206 Slow Hardener and 105 Epoxy Resin / 6 kg

The perfect combination for larger areas and bondings that take a longer time. The cured mixture is perfectly suited as a coating or adhesive and for wetting out fiberglass.

Image of 206 Slow Hardener and 105 Epoxy Resin / 0.6 kg

WEST SYSTEM 206 Slow Hardener and 105 Epoxy Resin / 0.6 kg

The perfect combination for larger areas and bondings that take a longer time. The cured mixture is perfectly suited as a coating or adhesive and for wetting out fiberglass.

Item no.
42377
EAN
5023181010571
Model no.
105-206A
Description
WEST SYSTEM - Slow hardener 206 + epoxy resin 105 / A-Pack
Contents
1.2 kg
Mixing ratio
500:100
For substrate
GRP, Wood, CFRP
Method of application
Roller, Brush, Filler
Sandable
Yes
Pot life
20 min
Curing time
9 h @ 20 °C
Fully cured
9 Days
with pump
No

SVB recommends the following for this item

Product details

This 2-part epoxy resin set consists of the 105 Epoxy Resin and 206 Slow Hardener. The professional epoxy system was developed specifically for the boating sector. It has high strength and outstanding versatility, making it suitable for a wide range of work and repairs on your boat. The system is also highly suitable for domestic use and other DIY projects. It can be used on a variety of surfaces such as wood, GRP or metals.
206 Slow hardener is an epoxy hardener, which consists of a low viscosity mixture of polyamines. It can be mixed with the 105 Epoxy resin in the ratio of 5 parts resin to 1 part hardener, the cured mixture yields a rigid, high-strength, moisture-resistant solid body with excellent bonding and barrier coating properties, perfectly suited as a coating or adhesive and for wetting out fiberglass. For an optimal mixing ratio, it is recommended to use the West System 300 Mini pumps. One whole pump of the resin and hardener yields the correct mixing ratio.
The hardener is typically used for larger areas and bondings that take a longer time. Pot life at 22°C: 25 - 30 minutes. Hardens to a solid mass in about 10 hours at 22°C and reaches full hardening after about nine days.

Possible applications:
  • Bonding
  • Filleting
  • Affixing hardware and flowing out to create a base for hardware
  • Fastener bonding
  • Laminating
  • Filling
  • Laminating with fiberglass
  • Barrier layering

Substrates:
  • Wood
  • Fiberglass
  • Composites
  • Various metals

Adding fillers
WEST SYSTEM offers a range of fillers that are used to thicken the base mix of resin and hardener for specific applications. By adding filler, a "thicker" consistency can be achieved (suitable for filling cavities, fillets, making large, uneven bondings and for use as a filler).


Hardener overview

Hardener Resin/hardener use Minimum temp Pot life at 22 °C (100g) Processing time at 22 °C (thin film) Curing time at 22 °C (thin film)
205 Fast Hardener General bonding and coating 5 °C 9-12 minutes 60-70 minutes 6-8 hours
206 Slow Hardener General bonding and coating 16 °C 20-25 minutes 90-110 minutes 10-15 hours
Note: Epoxy cures faster at higher temperatures and when thicker layers are applied.





ATTENTION: Not available in Switzerland!

Product safety

Please note the following hazard warnings:

Hazard pictograms
Signal word
Warning
Hazard warnings
Causes skin irritation.
May cause respiratory irritation.
Harmful if swallowed.
Toxic to aquatic life with long lasting effects.
Causes serious eye irritation.
May cause an allergic skin reaction.
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Causes severe skin burns and eye damage.
Keep out of reach of children.
Avoid release to the environment.
Wear protective gloves/protective clothing/eye protection/face protection.
Immediately call a POISON CENTER or doctor/physician.
IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
IF ON SKIN: Wash with plenty of soap and water.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
If skin irritation or rash occurs: Get medical advice/attention.
Dispose of contents/container to …
H315, H335, H302, H411, H319, H317, H334, H314, P102, P273, P280, P310, P301+P330+P331, P302+P352, P303+P361+P353, P305+P351+P338, P333+P313, P501

Documents

en-flag Datasheet
PDF, 212,36 KB
en-flag Manual
PDF, 2,28 MB
en-flag Safety datasheet
PDF, 240,07 KB
de-flag Manual
PDF, 4,11 MB
de-flag Safety datasheet
PDF, 355,76 KB
es-flag Manual
PDF, 3,96 MB
fr-flag Manual
PDF, 4,18 MB
it-flag Manual
PDF, 4,11 MB

What other SVB customers have to say

100% real reviews
Nobody has rated this product yet

Comparison with other products

1
This product
2
3
Item no.
42377
42343
42358
Customer ratings
(3)
(4)
(7)
Description
WEST SYSTEM - Slow hardener 206 + epoxy resin 105 / A-Pack
WEST SYSTEM - Slow hardener 206 + epoxy resin 105 / B-Pack
Slow hardener 206 + epoxy resin 105 / Junior Pack
Contents
1.2 kg
6 kg
600 g
Availability / Price
20 in stock
only €58 78
Buy now
12 in stock
only €197 44
Buy now
11 in stock
only €36 93
Buy now

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .

No questions asked yet. Be the first to ask a question!