WEST SYSTEM 206 Slow Hardener and 105 Epoxy Resin / 0.6 kg
WEST SYSTEM 206 Slow Hardener and 105 Epoxy Resin / 6 kg
The perfect combination for larger areas and bondings that take a longer time. The cured mixture is perfectly suited as a coating or adhesive and for wetting out fiberglass.
WEST SYSTEM Slow Hardener 206 and Epoxy Resin 105 / 1.2 kg
The perfect combination for larger areas and bondings that take a longer time. The cured mixture is perfectly suited as a coating or adhesive and for wetting out fiberglass.
SVB recommends the following for this item
Product details
206 Slow hardener is an epoxy hardener, which consists of a low viscosity mixture of polyamines. It can be mixed with the 105 Epoxy resin in the ratio of 5 parts resin to 1 part hardener, the cured mixture yields a rigid, high-strength, moisture-resistant solid body with excellent bonding and barrier coating properties, perfectly suited as a coating or adhesive and for wetting out fiberglass.
The hardener is typically used for larger areas and bondings that take a longer time. Pot life at 22°C: 25 - 30 minutes. Hardens to a solid mass in about 10 hours at 22°C and reaches full hardening after about nine days.
Possible applications:
- Bonding
- Filleting
- Affixing hardware and flowing out to create a base for hardware
- Securing bolts
- Laminating
- Filling
- Laminating with fiberglass
- Barrier layering
Substrates:
- Wood
- Fiberglass
- Composites
- Various metals
Adding fillers
WEST SYSTEM offers a range of fillers that are used to thicken the base mix of resin and hardener for specific applications. By adding filler, a "thicker" consistency can be achieved (suitable for filling cavities, fillets, making large, uneven bondings and for use as a filler).
Hardener overview
Hardener | Resin/hardener use | Minimum temp | Pot life at 22 °C (100g) | Processing time at 22 °C (thin film) | Curing time at 22 °C (thin film) |
205 Fast Hardener | General bonding and coating | 5 °C | 9-12 minutes | 60-70 minutes | 6-8 hours |
206 Slow Hardener | General bonding and coating | 16 °C | 20-25 minutes | 90-110 minutes | 10-15 hours |
ATTENTION: Not available in Switzerland!
Product safety
Please note the following hazard warnings:
May cause an allergic skin reaction.
Causes serious eye irritation.
May cause respiratory irritation.
Toxic to aquatic life with long lasting effects.
Harmful if swallowed.
Causes severe skin burns and eye damage.
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Dispose of contents/container to …
If eye irritation persists: Get medical advice/attention.
If skin irritation or rash occurs: Get medical advice/attention.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
IF ON SKIN: Wash with plenty of soap and water.
IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
Immediately call a POISON CENTER or doctor/physician.
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid release to the environment.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Keep out of reach of children.
Documents
Accessories
Customers also bought
Similar items
Comparison with other products
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .