WEST SYSTEM 206 Slow Hardener and 105 Epoxy Resin / 0.6 kg
Available variants:
WEST SYSTEM Slow Hardener 206 and Epoxy Resin 105 / 1.2 kg
The perfect combination for larger areas and bondings that take a longer time. The cured mixture is perfectly suited as a coating or adhesive and for wetting out fiberglass.
WEST SYSTEM 206 Slow Hardener and 105 Epoxy Resin / 6 kg
The perfect combination for larger areas and bondings that take a longer time. The cured mixture is perfectly suited as a coating or adhesive and for wetting out fiberglass.
Article Number
42358
EAN
5023181010427
Model no.
105-206J
Description
Slow hardener 206 + epoxy resin 105 / Junior Pack
Contents
600
g
Mixing ratio
500:100
For substrate
GRP, Wood, CFRP
Method of application
Roller, Brush, Filler
Sandable
Yes
Pot life
20
min
Curing time
9
h @ 20 °C
Fully cured
9
Days
with pump
No
SVB recommends the following for this item
Product details
This 2-part epoxy resin set consists of the 105 Epoxy Resin and 206 Slow Hardener. The professional epoxy system was developed specifically for the boating sector. It has high strength and outstanding versatility, making it suitable for a wide range of work and repairs on your boat. The system is also highly suitable for domestic use and other DIY projects. It can be used on a variety of surfaces such as wood, GRP or metals.
206 Slow hardener is an epoxy hardener, which consists of a low viscosity mixture of polyamines. It can be mixed with the 105 Epoxy resin in the ratio of 5 parts resin to 1 part hardener, the cured mixture yields a rigid, high-strength, moisture-resistant solid body with excellent bonding and barrier coating properties, perfectly suited as a coating or adhesive and for wetting out fiberglass.
The hardener is typically used for larger areas and bondings that take a longer time. Pot life at 22°C: 25 - 30 minutes. Hardens to a solid mass in about 10 hours at 22°C and reaches full hardening after about nine days.
Possible applications:
206 Slow hardener is an epoxy hardener, which consists of a low viscosity mixture of polyamines. It can be mixed with the 105 Epoxy resin in the ratio of 5 parts resin to 1 part hardener, the cured mixture yields a rigid, high-strength, moisture-resistant solid body with excellent bonding and barrier coating properties, perfectly suited as a coating or adhesive and for wetting out fiberglass.
The hardener is typically used for larger areas and bondings that take a longer time. Pot life at 22°C: 25 - 30 minutes. Hardens to a solid mass in about 10 hours at 22°C and reaches full hardening after about nine days.
Possible applications:
- Bonding
- Filleting
- Affixing hardware and flowing out to create a base for hardware
- Securing bolts
- Laminating
- Filling
- Laminating with fiberglass
- Barrier layering
Substrates:
- Wood
- Fiberglass
- Composites
- Various metals
Adding fillers
WEST SYSTEM offers a range of fillers that are used to thicken the base mix of resin and hardener for specific applications. By adding filler, a "thicker" consistency can be achieved (suitable for filling cavities, fillets, making large, uneven bondings and for use as a filler).
Hardener overview
| Hardener | Resin/hardener use | Minimum temp | Pot life at 22 °C (100g) | Processing time at 22 °C (thin film) | Curing time at 22 °C (thin film) |
| 205 Fast Hardener | General bonding and coating | 5 °C | 9-12 minutes | 60-70 minutes | 6-8 hours |
| 206 Slow Hardener | General bonding and coating | 16 °C | 20-25 minutes | 90-110 minutes | 10-15 hours |
ATTENTION: Not available in Switzerland!
Product safety
Please note the following hazard warnings:
Hazard pictograms
Signal word
Warning
Hazard warnings
Causes skin irritation.
May cause an allergic skin reaction.
Causes serious eye irritation.
May cause respiratory irritation.
Toxic to aquatic life with long lasting effects.
Harmful if swallowed.
Causes severe skin burns and eye damage.
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Dispose of contents/container to …
If eye irritation persists: Get medical advice/attention.
If skin irritation or rash occurs: Get medical advice/attention.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
IF ON SKIN: Wash with plenty of soap and water.
IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
Immediately call a POISON CENTER or doctor/physician.
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid release to the environment.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Keep out of reach of children.
May cause an allergic skin reaction.
Causes serious eye irritation.
May cause respiratory irritation.
Toxic to aquatic life with long lasting effects.
Harmful if swallowed.
Causes severe skin burns and eye damage.
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Dispose of contents/container to …
If eye irritation persists: Get medical advice/attention.
If skin irritation or rash occurs: Get medical advice/attention.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
IF ON SKIN: Wash with plenty of soap and water.
IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
Immediately call a POISON CENTER or doctor/physician.
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid release to the environment.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Keep out of reach of children.
H315, H317, H319, H335, H411, H302, H314, H334, P501, P337+P313, P333+P313, P305+P351+P338, P303+P361+P353, P302+P352, P301+P330+P331, P310, P280, P273, P261, P102
Documents
Datasheet
PDF, 212,36 KB
Manual
PDF, 2,28 MB
Safety datasheet
PDF, 240,07 KB
Manual
PDF, 4,11 MB
Safety datasheet
PDF, 355,76 KB
Manual
PDF, 3,96 MB
Manual
PDF, 4,18 MB
Manual
PDF, 4,11 MB
Accessories
-8%
Disposable Gloves / latex / 100 pcs.
€20.97
only
€19
29
16
WEST SYSTEM
Filler & Additive / 403 Microfibres
only
€14
24
36
WEST SYSTEM
Plastic Boats Repair and Maintenance Manual
only
€9
30
17
WEST SYSTEM
Technical Manual
only
€3
69
18
WEST SYSTEM
Repairing and Restoring Wooden Boats
only
€9
30
6
WEST SYSTEM
Filler & Additive / Collodial Silica 406
only
€15
08
48
WEST SYSTEM
Filler & Additive / Filleting Blend 405
only
€15
08
41
WEST SYSTEM
206 Slow Hardener / 0.2 kg
only
€22
65
8
WEST SYSTEM
422 Barrier Coat Additive / blistering protection
only
€21
81
14
WEST SYSTEM
Mini Pump Set
from
€25
17
2 variants
WEST SYSTEM
Cleaning Solution 855
only
€12
56
14
Customers also bought
-38%
INTERNATIONAL
Thinner No.1
€28.39
only
€17
61
> 100
WEST SYSTEM
Mini Pump Set
from
€25
17
2 variants
WEST SYSTEM
Filler & Additive / 403 Microfibres
only
€14
24
36
Sanitation Hose with Barrier Layer
from
€20
97
3 variants
EPIFANES
Paint Thinner
only
€15
08
83
-18%
WICHARD
OFFSHORE Knife / fluorescent
€41.01
only
€33
57
85
WEST SYSTEM
Slow Hardener 206 and Epoxy Resin 105 / 1.2 kg
only
€58
78
35
Similar items
YACHTCARE
Dosing Pumps for Epoxy Resin
only
€22
65
10
-6%
YACHTCARE
2-Component Epoxy Resin / for pump application
€57.86
only
€54
58
2
WEST SYSTEM
206 Slow Hardener / 1 kg
only
€61
30
6
WEST SYSTEM
206 Slow Hardener / 0.2 kg
only
€22
65
8
WEST SYSTEM
206 Slow Hardener and 105 Epoxy Resin / 6 kg
only
€197
44
6
WEST SYSTEM
Slow Hardener 206 and Epoxy Resin 105 / 1.2 kg
only
€58
78
36
WEST SYSTEM
Fast Hardener 205 / 1 kg
only
€61
30
22
WEST SYSTEM
205 Fast Hardener / 200 g
only
€22
65
8
WEST SYSTEM
Fast Hardener 205 and Epoxy Resin 105 / 6 kg
only
€197
44
12
WEST SYSTEM
Fast Hardener 205 and Epoxy Resin 105 / 1.2 kg
only
€58
78
48
Comparison with other products
1
This product
2
3
Item no.
42358
42377
42343
Customer ratings
Description
Slow hardener 206 + epoxy resin 105 / Junior Pack
WEST SYSTEM - Slow hardener 206 + epoxy resin 105 / A-Pack
WEST SYSTEM - Slow hardener 206 + epoxy resin 105 / B-Pack
Contents
600 g
1.2 kg
6 kg
Availability / Price
only €36
93
Buy now
only €58
78
Buy now
only €197
44
Buy now
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
- More "Customers ask customers" available in the following languages :
-
No questions asked yet. Be the first to ask a question!
