PerfectCharge MCA1225 Charger

WAECO PerfectCharge MCA IUOU chargers convince users with their particularly fast charging process, thanks to 6-stage charging. They are suitable for all battery types. Their low weight and extremely compact design allows for installation in confined spaces. The WAECO PerfectCharge charger has an input range of 90-260 volts and a charging capacity of 25 A. Equipped with 2+1 (2 amp output) charge output. This means that up to 3 battery banks can be charged simultaneously. Incl. temperature sensor.

Features:

• 6-step IUOU charging curve, optimized for charging: gel, AGM and lithium batteries
• Automatic changeover to charge retention or after 8/16 h (adjustable)
• Input voltage: 90-260 V
• Charge voltage selectable: 14.4 / 14.8 V
• Polarity reversal and short-circuit proof
• Mounting plate
• Can also be used as a power supply

Tips:
To CN2 connector

• A potential-free change-over switch with 3 contacts is available for the alarm function, e.g. For an audible alarm.
• Pin 1 = NC (normally closed), is connected to pin 3 in the idle state, connection is opened in the event of an alarm.
• Pin 2 = NO (normally open), is open in the idle state, is connected to pin 3 in the event of an alarm.
• Pin 3 = COM (common), is the common contact of the changeover switch.
• All contacts of the change-over switch are potential-free, so they have no reference to PLUS or MINUS.
• Sleep mode can be controlled by an external (optional) ON / OFF switch, which is connected to pins 4 and 5. When the switch is on, the sleep mode is active.
• Pin 4 = control input sleep mode
• Pin 5 = MINUS

Optionally, a remote control for sleep mode or to display the current operating mode as well as a temperature sensor are available. The charging characteristic of the device refers to room temperature. The sensor is adjusted to a voltage of 20 mV /°C.