VICTRON SMART BATTERY SENSE Voltage and Temperature Sensor / 12 / 24 V
Item no.
41313
EAN
8719076047919
Model no.
SBS050150200
Description
VICTRON - SMART BATTERY SENSE
Product details
Measure battery voltage and temperature with the SMART BATTERY SENSE Bluetooth voltage and temperature sensor from Victron. Access information about your lead-acid, AGM, GEL or lithium battery directly on your smartphone in the Victron Connect app. The SMART BATTERY SENSE wireless battery voltage and temperature sensor from Victron increases the charging efficiency of your MPPT solar chargers. The sensor is connected directly to the battery and data is transmitted to the charge regulator via Bluetooth for optimal charging and increased service life of your battery.
Better charging
No voltage loss due to cable resistance as the device is connected directly to the battery terminals, resulting in optimal charging voltage guaranteed. Smart Battery Sense can also be attached with an adhesive strip to the battery directly to measure battery temperature. This data is used to adjust the charging voltage according to temperature requirements. Colder lead batteries require a higher charging voltage than hotter batteries. With lithium batteries, the cells will be permanently damaged if they are charged at temperatures around or below freezing point. With lithium batteries, the temperature data transmitted is used to stop the charging process if the temperature is too low.
Wireless connection via Bluetooth
Smart Battery Sense and your MPPT solar regulator communicate wirelessly via Bluetooth. You can set up a VE.Smart Network with the Smart Battery Sense using the VictronConnect App. You can add one or more solar charge regulators to this network, provided they are connected to the same battery bank. Your charger is supplied with data from the Smart Battery Sense and can optimally adjust the charging voltage. If your solar charge regulator does not have VE.Smart support, an additional Bluetooth Smart Dongle is required.
Easy to install
It is easy to install the sensor on the battery. Connect the sensor's eyelets to the battery terminals and attach your Smart Battery Sense directly to the battery using the self-adhesive strip.
Technical data
Better charging
No voltage loss due to cable resistance as the device is connected directly to the battery terminals, resulting in optimal charging voltage guaranteed. Smart Battery Sense can also be attached with an adhesive strip to the battery directly to measure battery temperature. This data is used to adjust the charging voltage according to temperature requirements. Colder lead batteries require a higher charging voltage than hotter batteries. With lithium batteries, the cells will be permanently damaged if they are charged at temperatures around or below freezing point. With lithium batteries, the temperature data transmitted is used to stop the charging process if the temperature is too low.
Wireless connection via Bluetooth
Smart Battery Sense and your MPPT solar regulator communicate wirelessly via Bluetooth. You can set up a VE.Smart Network with the Smart Battery Sense using the VictronConnect App. You can add one or more solar charge regulators to this network, provided they are connected to the same battery bank. Your charger is supplied with data from the Smart Battery Sense and can optimally adjust the charging voltage. If your solar charge regulator does not have VE.Smart support, an additional Bluetooth Smart Dongle is required.
Easy to install
It is easy to install the sensor on the battery. Connect the sensor's eyelets to the battery terminals and attach your Smart Battery Sense directly to the battery using the self-adhesive strip.
Technical data
| Dimensions (H x W x D) | 14 x 38 x 38 mm |
| Cable length | 45 cm |
| Connection | M10 cable lug |
| fuse | T1A 250 V |
| Operating temperature | -10 °C to + 60 °C |
| Voltage range | 8 to 60 V |
| Maximum voltage | 65 V |
by Philipp K.
7/23/2023
Verified purchase
7/23/2023
Verified purchase
by Andreas A.
6/29/2021
Verified purchase
6/29/2021
Verified purchase
Customers also bought
Wood Thru-Hull Plugs / Ø 10-40 mm
only
€7
14
RAYMARINE
Seatalk NG Backbone Cable
from
€33
57
RAYMARINE
SeaTalkNG 5-way Splitter
only
€38
61
Stainless Steel Pipes V4A
from
€17
61
NMEA2000
NMEA2000 4-way Splitter / Micro-C
only
€56
26
NMEA2000
NMEA2000 Starter Kit / Micro-C
only
€109
20
RAYMARINE
Adapter Cable SeaTalk NG to NMEA 2000, female
only
€43
66
BLUE SEA
Dual Bus 100A / 300V Power Distributor
only
€24
33
GLEISTEIN
POLYESTER - Three-Strand Mooring Line / black
from
€1
93
GLEISTEIN
DOCK-TWIN Mooring Line / navy blue
from
€2
35
Similar items
NASA MARINE
Clipper Batterie Monitor BM-1 Lithium LiFePO4
only
€142
82
SEATEC
Round Voltmeter / flush / 12/24V
only
€8
36
NEW
VDO
VERATRON VL Flex Battery Monitor IBM Kit
from
€198
74
VDO
VERATRON VL Flex Gauge / NMEA2000 / black
only
€104
62
VDO
VERATRON VL Flex Gauge / NMEA2000 / white
only
€108
82
BLUE SEA
M2 VSM Systems Monitor for AC, DC, Tank & Bilge with NMEA2000 Interface
only
€424
33
VOTRONIC
Bluetooth Connector S-BC
only
€117
61
€127.65
-8%
SUNWARE
FOX D1 Battery Display / flush mounting version
only
€54
58
SUNWARE
FOX D1 Battery Display / top mounting version
only
€54
58
VICTRON
GX TOUCH 50 Battery Monitor
only
€210
04
€235.00
-11%
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
- More "Customers ask customers" available in the following languages :
-
-
No questions asked yet. Be the first to ask a question!
