The charger is supplied without an AC connection cable. This must be ordered separately "VICTRON AC power cable 2 metres / itm.: 41330"
The charger can be controlled via Bluetooth from a smartphone, tablet or laptop. The device also features a VE.Direct port and programmable relay. Smart Battery Sense can also be connected to control the battery temperature compensation. The Phoenix Smart Charger IP43 is a universally usable high-tech battery charger thanks to its well-known five-step charge algorithm and the ability to programme your own charge algorithm.
Phoenix Smart features an adaptive 5-step charge algorithm. Adaptive means that the charge process is automatically optimised to the way the battery is being used. In addition to the standard three charging levels (bulk, absorption and float), the Phoenix Smart offers a fourth and fifth level: storage and recondition. Following a deep discharge, the absorption time is increased automatically to ensure that the battery is fully charged. When the battery has not been discharged for 24 hours, Storage Mode kicks in.
To protect the batteries in the best possible way, Phoenix Smart has various features such as BatterySafe mode, which prevents excessive gassing, a temperature sensor, which limits the rate of voltage increase as the battery temperature rises, or a voltage sensor to compensate for voltage losses due to cable resistance, so that the battery always receives the correct charging current.
The Phoenix Smart charger is controlled by microprocessors that adjust to almost any type of battery. Suitable for lead-acid, AGM, gel and lithium-ion batteries.
Simple system with DC consumers only
The battery charger charges the battery and at the same time serves as a power supplier for the connected devices.
System with inverter
To ensure the supply of the 230 V AC source at all times, this system includes an inverter. For chargers with 3 outputs, several battery groups can be charged separately.
|Input voltage range||210 - 250 V AC|
|Charging current||25 A|
|Low current mode||12.5 A|
|No load power consumption||1 W|
|Frequency||45 - 65 Hz|
|Charge voltage 'absorption'||Normal: 28.8 V
High: 29.4 V
Li-Ion: 28.4 V
|Charge voltage 'float'||Normal: 27.6 V
High: 27.6 V
Li-Ion: 27.0 V
|Storage mode||Normal: 26.4 V
High: 26.4 V
Li-Ion: 27.0 V
|Operating temperature range||-20 to +60 °C|
|Battery connection||Screw terminals 16 mm²|
|Dimensions (h x w x d)||180 x 249 x 100 mm|
Customers ask customers
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: firstname.lastname@example.org or by phone on: +49 (0)421 57290510 .