PHOENIX 12/800 Inverter / 230V / SCHUKO

With high efficiency, PHOENIX inverters convert your 12 volt battery voltage into a reliable 230 V and clean sine wave AC voltage.

High load capacity
Thanks to the high short-term load capacity, consumers with high starting currents can also be used.

Reliable
Victron's inverters have proven themselves over many years and offer reliable protection against short circuits and overheating

ECO Mode
In ECO mode, the inverter switches to standby as soon as the load drops below a preset value (minimum load: 15W). In standby mode, the inverter then switches on for a short period (adjustable default setting: every 2.5 seconds). If the load exceeds a preset level, the inverter remains on.

​Remote on/off switch
If required, a two-pole on/off switch can be connected to control the inverter remotely.

Overview of other features

• Adjustable ECO mode for standby switching
• Proven reliability, protected against overheating and short circuits
• Schuko socket
• VE.Direct port for connection to your smartphone / computer (VE.Direct Bluetooth dongle / USB interface cable required)

Technical specifications

Continuous power	800 VA
Peak power	1500 W
AC voltage / frequency output	230 V AC or 120 V AC / 50 Hz or 60 Hz
Input voltage range	9.2- 17 V
DC low shut down (adjustable)	9.3 V
DC low restart and alarm (adjustable)	10.9 V.
Battery charged detect	14.0 V
Maximum efficiency	90%
Zero-load power	6.5 W.
Default zero-load power in ECO mode	1.0 W
Protection	a - f
Battery connection	Screw terminals
Maximum cable cross-section	25 mm²
AC outputs	230 V Schuko (CEE 7/4)
Material	Steel case and plastic cover
Protection category	IP21
Operating temperature range	-40 to +65° C
Dimensions (HxWxD)	105 x 230 x 325 mm
Weight	5.5 kg