Item no.
41242
EAN
8719076044949
Model no.
PMP122160000
Description
VICTRON - MultiPlus 12/1600/70-16 230V
Device type
Charger/inverter combined
Charging Current
70
A
Charging outputs
1
Battery nominal voltage
12
V
Network AC voltage
187 - 265
V
Battery type
AGM, GEL
Battery Capacity
280 - 700
Ah
Continous Power
1300
W
Temperature sensor can be connected
Yes
Power Lead
Yes
Integrated fan
Yes
Integrated charging cable
No
Optional remote display/operation
Yes
Width
26.5
cm
Height
47
cm
Depth
12
cm
Weight
10.2
kg
Input
12
V
Output
230
V
AC connection
Multi-connector
Peak power
2800
W
SVB recommends the following for this item
Product details
This device combines a powerful sine wave inverter, state-of-the-art battery charger using VICTRON's 4-stage adaptive charging technology and a high-speed AC source transfer switch in a compact housing. The unit is further characterised by its proven reliability, is short-circuit-proof and protects against overheating.
Fully automatic and high load capacities
If the shore power or on-board generator is interrupted, the MultiPlus inverter then automatically takes over the supply of connected consumers in less than 20 milliseconds.
Peak power is often required for a limited period only. In such cases, the MultiPlus automatically compensates for insufficient shore power or generator output with energy from the battery. If the load is reduced, i.e.. when consumers are switched off, the energy that is then available again can be used to charge the batteries.
Thanks to the high short-term load capacity, consumers with high inrush currents, such as LED lights, halogen bulbs or power tools, can also be operated.
Optimal charging of starter and consumer batteries
The MulitPlus has two DC outputs for charging starter and consumer batteries. The 4-stage charging characteristic always ensures optimum charging and can be adjusted to different battery types by means of DIP switches.
Intelligent search mode
When search mode is activated, power consumption of the inverter is reduced by about 70% at no load operation. In this mode, the inverter shuts down at low load and turns on again every two seconds for a short period. If the output current of a set limit is exceeded, the inverter immediately switches on again. If this is not the case, the inverter switches itself off again.
Integrated multifunction relay
The MultiPlus also has a programmable multi-function relay, which works as an alarm relay in the default setting. This relay can also be reprogrammed for other functions, e.g. as a start relay for a generator.
System with shore connection
The Multiplus charger / inverter combo acts as a UPS (uninterruptible power supply) to provide power in the event of an input power source failure.
System with shore connection and DC generator
In this system example, the generator charges the batteries directly or feeds the inverter.
Technical specifications
Inverter
Charger
General
Notes
Fully automatic and high load capacities
If the shore power or on-board generator is interrupted, the MultiPlus inverter then automatically takes over the supply of connected consumers in less than 20 milliseconds.
Peak power is often required for a limited period only. In such cases, the MultiPlus automatically compensates for insufficient shore power or generator output with energy from the battery. If the load is reduced, i.e.. when consumers are switched off, the energy that is then available again can be used to charge the batteries.
Thanks to the high short-term load capacity, consumers with high inrush currents, such as LED lights, halogen bulbs or power tools, can also be operated.
Optimal charging of starter and consumer batteries
The MulitPlus has two DC outputs for charging starter and consumer batteries. The 4-stage charging characteristic always ensures optimum charging and can be adjusted to different battery types by means of DIP switches.
Intelligent search mode
When search mode is activated, power consumption of the inverter is reduced by about 70% at no load operation. In this mode, the inverter shuts down at low load and turns on again every two seconds for a short period. If the output current of a set limit is exceeded, the inverter immediately switches on again. If this is not the case, the inverter switches itself off again.
Integrated multifunction relay
The MultiPlus also has a programmable multi-function relay, which works as an alarm relay in the default setting. This relay can also be reprogrammed for other functions, e.g. as a start relay for a generator.
System with shore connection
The Multiplus charger / inverter combo acts as a UPS (uninterruptible power supply) to provide power in the event of an input power source failure.
System with shore connection and DC generator
In this system example, the generator charges the batteries directly or feeds the inverter.
Technical specifications
Inverter
| Input voltage range | 9.5 - 17 V |
| Output voltage | 230 V AC |
| Frequency | 50 Hz |
| Continuous output power | 1600 VA |
| Peak performance | 2800 W |
| Max. Efficiency | 93% |
| Zero-load power | 10 W |
| Zero-load power in search mode | 3 W |
Charger
| AC input | 187 - 265 V AC |
| Frequency | 45 - 65 Hz |
| Charge voltage 'absorption' | 14.4 V |
| Charge voltage 'float' | 13.8 V |
| Storage mode | 13.2 V |
| Charging current | 70 A |
| Battery temperature sensor | Yes |
General
| Protection | a - g |
| Operating temperature range | -40 to +65 °C |
| Material | Steel / ABS |
| Protection category | IP21 |
| 230 V connection | G-ST18i connector |
| Battery connection | 50 mm² |
| Dimensions (WxHxD) | 265 x 470 x 120 mm |
| Weight: | 10.2 kg |
Notes
- A battery temperature sensor is included in the delivery contents. This is insulated and glued into a 10 mm ring cable lug and is attached directly to a battery terminal.
Do not use the sensor in conjunction with LiFePO4 batteries. - Also included are coupling and plug (type GST18) for the AC-INPUT and AC-OUTPUT connection. These come plugged together in the box and are may not immediately be recognised as couplings and plugs when they are unpacked.
Accessories
by Tiberius D.
5/5/2022
Verified purchase
5/5/2022
Verified purchase
Customers also bought
RULE
Bilge Switch Panel 12 V
only €41
13
€49.56
-17%
Sanitation Hose with Barrier Layer
from €20
97
WHALE
Supersup Smart 650 Bilge Pump
only €81
47
€94.00
-13%
BLUE SEA
Dual USB Charging Socket
only €27
69
NMEA2000
NMEA2000 Network Cable / Micro-C
from €20
13
ARC
TEAK Folding Table Top / 90 x 70 cm
only €336
09
VICTRON
BMV-712 Smart Battery Monitor
only €187
35
€220.00
-15%
VICTRON
GX TOUCH 50 Battery Monitor
only €210
04
€248.00
-15%
Similar items
VICTRON
MultiPlus-II GX Inverter/Charger 48 V / 5000 VA / 70 A
only €1.932
73
€2,267.01
NEW
VICTRON
MultiPlus-II GX Inverter/Charger 48 V / 3000 VA / 35 A
only €1.310
88
€1,540.99
NEW
VICTRON
MultiPlus-II GX Inverter/Charger 24 V / 3000 VA / 70 A
only €1.579
79
€1,860.99
NEW
VICTRON
MultiPlus-II Inverter/Charger 48 V / 3000 VA / 35 A
only €1.025
17
€1,202.00
NEW
VICTRON
MultiPlus-II Inverter/Charger 24 V / 3000 VA / 70 A
only €1.294
08
€1,520.00
NEW
VICTRON
MultiPlus-II Inverter/Charger 12 V / 3000 VA / 120 A
only €1.294
08
€1,520.00
NEW
VICTRON
MultiPlus Inverter / Charger 12 V / 1600 W / 80 A
only €1.025
17
€1,210.00
NEW
VICTRON
MultiPlus Inverter / Charger 12 V / 1000 W / 50 A
only €684
83
€804.99
-15%
VICTRON
MultiPlus Inverter / Charger 12 V / 700 W / 35 A
only €491
55
€576.00
-15%
VICTRON
MultiPlus Inverter / Charger 12 V / 430 W / 20 A
only €394
92
€464.00
-15%
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
No questions asked yet. Be the first to ask a question!